wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

issue #2310

This commit is contained in:
kraus 2023-12-02 22:23:22 +01:00
parent c226f13f29
commit 4786e15447
5 changed files with 125 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

121
csrc/u8x8_d_ssd1322.c
View File

@ -427,6 +427,127 @@ uint8_t u8x8_d_ssd1322_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void
return 1;
}
/*=========================================================*/
/*
Top Win OLED 240x128
Discussion: https://github.com/olikraus/u8g2/discussions/2308
Issue: https://github.com/olikraus/u8g2/issues/2310
The main difference to the previous device seems to be the dual com line mode
(0x0a0 command)
*/
static const uint8_t u8x8_d_ssd1322_topwin_240x128_flip0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CAA(0x0a0, 0x036, 0x001), /* remap */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_ssd1322_topwin_240x128_flip1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_CAA(0x0a0, 0x024, 0x001), /* remap */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const u8x8_display_info_t u8x8_ssd1322_topwin_240x128_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 20,
/* pre_chip_disable_wait_ns = */ 10,
/* reset_pulse_width_ms = */ 100, /* SSD1322: 2 us */
/* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */
/* sda_setup_time_ns = */ 50, /* SSD1322: 15ns, but cycle time is 100ns, so use 100/2 */
/* sck_pulse_width_ns = */ 50, /* SSD1322: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
/* sck_clock_hz = */ 10000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns, increased to 8MHz (issue 215), 10 MHz (issue 301) */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 10,
/* write_pulse_width_ns = */ 150, /* SSD1322: cycle time is 300ns, so use 300/2 = 150 */
/* tile_width = */ 30, /* 240 pixel, so we require 30 bytes for this */
/* tile_height = */ 16,
/* default_x_offset = */ 24, /* this is the byte offset (there are two pixel per byte with 4 bit per pixel) */
/* flipmode_x_offset = */ 0x000,
/* pixel_width = */ 240,
/* pixel_height = */ 128
};
static const uint8_t u8x8_d_ssd1322_topwin_240x128_init_seq[] = {
U8X8_DLY(1),
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_DLY(1),
U8X8_CA(0xfd, 0x12), /* unlock */
U8X8_C(0xae), /* display off */
U8X8_CA(0xb3, 0x91), /* set display clock divide ratio/oscillator frequency (set clock as 80 frames/sec) */
U8X8_CA(0xca, 0x7f), /* multiplex ratio 1/128 Duty (0x0F~0x7F) */
U8X8_CA(0xa2, 0x00), /* display offset, shift mapping ram counter */
U8X8_CA(0xa1, 0x00), /* display start line */
U8X8_CAA(0xa0, 0x36, 0x001), /* Set Re-Map / Dual COM Line Mode, https://github.com/olikraus/u8g2/discussions/2308 */
U8X8_CA(0xab, 0x01), /* Enable Internal VDD Regulator */
U8X8_CAA(0xb4, 0xa0, 0x005|0x0fd), /* Display Enhancement A */
U8X8_CA(0xc1, 0x9f), /* contrast */
U8X8_CA(0xc7, 0x0f), /* Set Scale Factor of Segment Output Current Control */
U8X8_C(0xb9), /* linear grayscale */
U8X8_CA(0xb1, 0xe2), /* Phase 1 (Reset) & Phase 2 (Pre-Charge) Period Adjustment */
U8X8_CAA(0xd1, 0x082|0x020, 0x020), /* Display Enhancement B */
U8X8_CA(0xbb, 0x1f), /* precharge voltage */
U8X8_CA(0xb6, 0x08), /* precharge period */
U8X8_CA(0xbe, 0x07), /* vcomh */
U8X8_C(0xa6), /* normal display */
U8X8_C(0xa9), /* exit partial display */
U8X8_DLY(1), /* delay 2ms */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
uint8_t u8x8_d_ssd1322_topwin_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1322_topwin_240x128_display_info);
break;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1322_topwin_240x128_init_seq);
break;
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
if ( arg_int == 0 )
{
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1322_topwin_240x128_flip0_seq);
u8x8->x_offset = u8x8->display_info->default_x_offset;
}
else
{
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1322_topwin_240x128_flip1_seq);
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
}
break;
default:
return u8x8_d_ssd1322_common(u8x8, msg, arg_int, arg_ptr);
}
return 1;
}
/*=========================================================*/
/*
NHD-2.7-12864WDW3-M

1
tools/codebuild/codebuild.c
View File

@ -2032,6 +2032,7 @@ struct controller controller_list[] =
"", /* is_generate_u8g2_class= */ 1,
{
{ "240x128" },
{ "topwin_240x128" },
{ NULL }
}
},

1
tools/inoupdate/frame_buffer.ino
View File

@ -59,6 +59,7 @@
//U8G2_SSD1320_160X80_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_SSD1320_160X80_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_SSD1322_240x128_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1322_TOPWIN_240x128_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1322_NHD_256X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1362_256X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h

1
tools/inoupdate/page_buffer.ino
View File

@ -55,6 +55,7 @@
//U8G2_SSD1306_96X40_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
//U8G2_SSD1306_96X39_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
//U8G2_SSD1322_240X128_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_SSD1322_TOPWIN_240X128_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_SSD1322_NHD_256X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
//U8G2_SSD1362_256X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h

1
tools/inoupdate/u8x8.ino
View File

@ -66,6 +66,7 @@
//U8X8_SSD1320_160X80_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1320_160X80_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1322_240X128_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1322_TOPWIN_240X128_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1322_NHD_256X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1322_NHD_256X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_SSD1362_256X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);