u8g2-copy/sys/arduino/u8g2_full_buffer/MAX7219_Scroll/MAX7219_Scroll.ino

87 lines
2.6 KiB
C++

/*
MAX7219_U8g2.ino
A special example for the MAX7219 based LED display matrix
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2016, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <Arduino.h>
#include <U8g2lib.h>
#ifdef U8X8_HAVE_HW_SPI
#include <SPI.h>
#endif
#ifdef U8X8_HAVE_HW_I2C
#include <Wire.h>
#endif
U8G2_MAX7219_32X8_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 10, /* dc=*/ U8X8_PIN_NONE, /* reset=*/ U8X8_PIN_NONE);
uint16_t pos;
uint16_t len;
char *str = " Hello from U8g2... Arduino monochrome graphics library ";
void setup(void) {
u8g2.begin();
u8g2.setFont(u8g2_font_victoriabold8_8r); // choose a 8x8 u8g2 font
pos = 0;
len = strlen(str)*8;
}
#define BUF_LEN 12
void draw_string_at_bitpos(const char *str, uint16_t bitpos)
{
char buf[BUF_LEN];
uint16_t start = bitpos / 8;
uint16_t i;
for( i = 0; i < BUF_LEN-1; i++)
{
buf[i] = str[start+i];
if ( str[start+i] == '\0' )
break;
}
buf[BUF_LEN-1] = '\0';
u8g2.drawStr( -(bitpos & 7), 7, buf); // write buffer
}
void loop(void) {
u8g2.clearBuffer(); // clear the internal memory
draw_string_at_bitpos(str, pos);
u8g2.sendBuffer(); // transfer internal memory to the display
pos++;
if ( pos >= len )
pos = 0;
delay(50);
}