181 lines
8.5 KiB
C++
181 lines
8.5 KiB
C++
/*
|
|
|
|
U8x8lib.h
|
|
|
|
C++ Arduino wrapper for the u8x8 struct and c functions.
|
|
|
|
*/
|
|
|
|
#ifndef _U8X8LIB_HH
|
|
#define _U8X8LIB_HH
|
|
|
|
#include <Arduino.h>
|
|
#include <Print.h>
|
|
|
|
#include "u8x8.h"
|
|
|
|
extern "C" uint8_t u8x8_gpio_and_delay_arduino(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
|
extern "C" uint8_t u8x8_byte_arduino_hw_spi(u8x8_t *u8g2, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
|
|
|
void u8x8_SetPin_4Wire_SW_SPI(u8x8_t *u8x8, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_SetPin_3Wire_SW_SPI(u8x8_t *u8x8, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset);
|
|
void u8x8_SetPin_4Wire_HW_SPI(u8x8_t *u8x8, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_SetPin_SSD13xx_SW_I2C(u8x8_t *u8x8, uint8_t clock, uint8_t data, uint8_t reset);
|
|
void u8x8_SetPin_8Bit_6800(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_SetPin_8Bit_8080(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t wr, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
|
|
void u8x8_Setup_4Wire_SW_SPI(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_Setup_3Wire_SW_SPI(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset);
|
|
void u8x8_Setup_4Wire_HW_SPI(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_Setup_SSD13xx_SW_I2C(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t clock, uint8_t data, uint8_t reset);
|
|
void u8x8_Setup_8Bit_6800(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
void u8x8_Setup_8Bit_8080(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t wr, uint8_t cs, uint8_t dc, uint8_t reset);
|
|
|
|
class U8X8 : public Print
|
|
{
|
|
protected:
|
|
u8x8_t u8x8;
|
|
public:
|
|
uint8_t tx, ty;
|
|
|
|
U8X8(void) { home(); }
|
|
u8x8_t *getU8x8(void) { return &u8x8; }
|
|
|
|
uint8_t getCols(void) { return u8x8_GetCols(&u8x8); }
|
|
uint8_t getRows(void) { return u8x8_GetRows(&u8x8); }
|
|
|
|
void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr) {
|
|
u8x8_DrawTile(&u8x8, x, y, cnt, tile_ptr); }
|
|
|
|
void initDisplay(void) {
|
|
u8x8_InitDisplay(&u8x8); }
|
|
|
|
void clearDisplay(void) {
|
|
u8x8_ClearDisplay(&u8x8); }
|
|
|
|
void setPowerSave(uint8_t is_enable) {
|
|
u8x8_SetPowerSave(&u8x8, is_enable); }
|
|
|
|
void begin(void) {
|
|
initDisplay(); clearDisplay(); setPowerSave(0); }
|
|
|
|
void setFlipMode(uint8_t mode) {
|
|
u8x8_SetFlipMode(&u8x8, mode); }
|
|
|
|
void setContrast(uint8_t value) {
|
|
u8x8_SetContrast(&u8x8, value); }
|
|
|
|
void setInverseFont(uint8_t value) {
|
|
u8x8_SetInverseFont(&u8x8, value); }
|
|
|
|
void setFont(const uint8_t *font_8x8) {
|
|
u8x8_SetFont(&u8x8, font_8x8); }
|
|
|
|
void drawGlyph(uint8_t x, uint8_t y, uint8_t encoding) {
|
|
u8x8_DrawGlyph(&u8x8, x, y, encoding); }
|
|
|
|
void drawString(uint8_t x, uint8_t y, const char *s) {
|
|
u8x8_DrawString(&u8x8, x, y, s); }
|
|
|
|
void drawUTF8(uint8_t x, uint8_t y, const char *s) {
|
|
u8x8_DrawUTF8(&u8x8, x, y, s); }
|
|
|
|
uint8_t getUTF8Len(const char *s) {
|
|
return u8x8_GetUTF8Len(&u8x8, s); }
|
|
|
|
size_t write(uint8_t v) {
|
|
u8x8_DrawGlyph(&u8x8, tx, ty, v);
|
|
tx++;
|
|
return 1;
|
|
}
|
|
|
|
void inverse(void) { setInverseFont(1); }
|
|
void noInverse(void) { setInverseFont(0); }
|
|
|
|
/* LiquidCrystal compatible functions */
|
|
void home(void) { tx = 0; ty = 0; }
|
|
void clear(void) { clearDisplay(); home(); }
|
|
void noDisplay(void) { u8x8_SetPowerSave(&u8x8, 1); }
|
|
void display(void) { u8x8_SetPowerSave(&u8x8, 0); }
|
|
void setCursor(uint8_t x, uint8_t y) { tx = x; ty = y; }
|
|
|
|
};
|
|
|
|
|
|
// constructor list start
|
|
/* generated code (codebuild), u8g2 project */
|
|
class U8X8_SSD1306_128X64_NONAME_4W_SW_SPI : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_SSD1306_128X64_NONAME_4W_HW_SPI : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_SSD1306_128X64_NONAME_3W_SW_SPI : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_3W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
|
}
|
|
};
|
|
class U8X8_SSD1306_128X64_NONAME_6800 : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_SSD1306_128X64_NONAME_8080 : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_SSD1306_128X64_NONAME_SW_I2C : public U8X8 {
|
|
public: U8X8_SSD1306_128X64_NONAME_SW_I2C(uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x64_noname, u8x8_cad_001, u8x8_byte_ssd13xx_sw_i2c, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_SSD13xx_SW_I2C(getU8x8(), clock, data, reset);
|
|
}
|
|
};
|
|
class U8X8_UC1701_DOGS102_4W_SW_SPI : public U8X8 {
|
|
public: U8X8_UC1701_DOGS102_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_uc1701_dogs102, u8x8_cad_001, u8x8_byte_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_UC1701_DOGS102_4W_HW_SPI : public U8X8 {
|
|
public: U8X8_UC1701_DOGS102_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_uc1701_dogs102, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_UC1701_DOGS102_3W_SW_SPI : public U8X8 {
|
|
public: U8X8_UC1701_DOGS102_3W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_uc1701_dogs102, u8x8_cad_001, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
|
}
|
|
};
|
|
class U8X8_UC1701_DOGS102_6800 : public U8X8 {
|
|
public: U8X8_UC1701_DOGS102_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_uc1701_dogs102, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
|
}
|
|
};
|
|
class U8X8_UC1701_DOGS102_8080 : public U8X8 {
|
|
public: U8X8_UC1701_DOGS102_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
|
u8x8_Setup(getU8x8(), u8x8_d_uc1701_dogs102, u8x8_cad_001, u8x8_byte_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
|
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
|
}
|
|
};
|
|
|
|
// constructor list end
|
|
|
|
|
|
|
|
#endif /* _U8X8LIB_HH */
|
|
|
|
|