wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
u8g2-copy/csrc/u8x8_d_ls013b7dh03.c

235 lines
8.1 KiB
C
Raw Permalink Blame History

/*
u8x8_d_ls013b7dh03.c
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2016, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The LS013B7DH02 is a simple display and controller
--> no support for contrast adjustment, flip and power down.
*/
#include "u8x8.h"
#define SWAP8(a) ((((a) & 0x80) >> 7) | (((a) & 0x40) >> 5) | (((a) & 0x20) >> 3) | (((a) & 0x10) >> 1) | (((a) & 0x08) << 1) | (((a) & 0x04) << 3) | (((a) & 0x02) << 5) | (((a) & 0x01) << 7))
#define LS013B7DH03_CMD_UPDATE (0x01)
#define LS013B7DH03_CMD_ALL_CLEAR (0x04)
#define LS013B7DH03_VAL_TRAILER (0x00)
static const u8x8_display_info_t u8x8_ls013b7dh03_128x128_display_info =
{
/* chip_enable_level = */ 1,
/* chip_disable_level = */ 0,
/* post_chip_enable_wait_ns = */ 50,
/* pre_chip_disable_wait_ns = */ 50,
/* reset_pulse_width_ms = */ 1,
/* post_reset_wait_ms = */ 6,
/* sda_setup_time_ns = */ 227, /* 227 nsec according to the datasheet */
/* sck_pulse_width_ns = */ 255, /* 450 nsec according to the datasheet */
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* changed from 2 to 0 (https://github.com/olikraus/u8g2/issues/1771) */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 100,
/* write_pulse_width_ns = */ 100,
/* tile_width = */ 16,
/* tile_height = */ 16,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 128,
/* pixel_height = */ 128
};
uint8_t u8x8_d_ls013b7dh03_128x128(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_t arg_int, void *arg_ptr)
{
uint8_t y, c, i;
uint8_t *ptr;
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ls013b7dh03_128x128_display_info);
break;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
/* clear screen */
u8x8_cad_StartTransfer(u8x8);
u8x8_cad_SendCmd(u8x8, SWAP8(LS013B7DH03_CMD_ALL_CLEAR) );
u8x8_cad_SendCmd(u8x8, LS013B7DH03_VAL_TRAILER);
u8x8_cad_EndTransfer(u8x8);
break;
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
/* not available for the ls013b7dh03 */
break;
case U8X8_MSG_DISPLAY_DRAW_TILE:
/* each tile is 8 lines, with the data starting at the left edge */
y = ((((u8x8_tile_t *)arg_ptr)->y_pos) * 8) + 1;
c = ((u8x8_tile_t *)arg_ptr)->cnt;
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
/* send data mode byte */
u8x8_cad_StartTransfer(u8x8);
u8x8_cad_SendCmd(u8x8, SWAP8(LS013B7DH03_CMD_UPDATE) );
/* send 8 lines of 16 bytes (=128 pixels) */
for( i = 0; i < 8; i++ )
{
u8x8_cad_SendCmd(u8x8, SWAP8(y + i) );
u8x8_cad_SendData(u8x8, c, ptr);
u8x8_cad_SendCmd(u8x8, LS013B7DH03_VAL_TRAILER);
ptr += c;
}
/* finish with a trailing byte */
u8x8_cad_SendCmd(u8x8, LS013B7DH03_VAL_TRAILER);
u8x8_cad_EndTransfer(u8x8);
break;
default:
return 0;
}
return 1;
}
static const u8x8_display_info_t u8x8_ls027b7dh01_400x240_display_info =
{
/* chip_enable_level = */ 1,
/* chip_disable_level = */ 0,
/* post_chip_enable_wait_ns = */ 50,
/* pre_chip_disable_wait_ns = */ 50,
/* reset_pulse_width_ms = */ 1,
/* post_reset_wait_ms = */ 6,
/* sda_setup_time_ns = */ 227, /* 227 nsec according to the datasheet */
/* sck_pulse_width_ns = */ 255, /* 450 nsec according to the datasheet */
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* changed from 2 to 0 (https://github.com/olikraus/u8g2/issues/1771) */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 100,
/* write_pulse_width_ns = */ 100,
/* tile_width = */ 50,
/* tile_height = */ 30,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 400,
/* pixel_height = */ 240
};
uint8_t u8x8_d_ls027b7dh01_400x240(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ls027b7dh01_400x240_display_info);
break;
default:
return u8x8_d_ls013b7dh03_128x128(u8x8, msg, arg_int, arg_ptr);
}
return 1;
}
static const u8x8_display_info_t u8x8_ls027b7dh01_m0_400x240_display_info =
{
/* chip_enable_level = */ 1,
/* chip_disable_level = */ 0,
/* post_chip_enable_wait_ns = */ 50,
/* pre_chip_disable_wait_ns = */ 50,
/* reset_pulse_width_ms = */ 1,
/* post_reset_wait_ms = */ 6,
/* sda_setup_time_ns = */ 227, /* 227 nsec according to the datasheet */
/* sck_pulse_width_ns = */ 255, /* 450 nsec according to the datasheet */
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active low, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 100,
/* write_pulse_width_ns = */ 100,
/* tile_width = */ 50,
/* tile_height = */ 30,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 400,
/* pixel_height = */ 240
};
uint8_t u8x8_d_ls027b7dh01_m0_400x240(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ls027b7dh01_m0_400x240_display_info);
break;
default:
return u8x8_d_ls013b7dh03_128x128(u8x8, msg, arg_int, arg_ptr);
}
return 1;
}
static const u8x8_display_info_t u8x8_ls013b7dh05_144x168_display_info =
{
/* chip_enable_level = */ 1,
/* chip_disable_level = */ 0,
/* post_chip_enable_wait_ns = */ 50,
/* pre_chip_disable_wait_ns = */ 50,
/* reset_pulse_width_ms = */ 1,
/* post_reset_wait_ms = */ 6,
/* sda_setup_time_ns = */ 227, /* 227 nsec according to the datasheet */
/* sck_pulse_width_ns = */ 255, /* 450 nsec according to the datasheet */
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* changed from 2 to 0 (https://github.com/olikraus/u8g2/issues/1771) */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 100,
/* write_pulse_width_ns = */ 100,
/* tile_width = */ 18,
/* tile_height = */ 21,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 144,
/* pixel_height = */ 168
};
uint8_t u8x8_d_ls013b7dh05_144x168(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ls013b7dh05_144x168_display_info);
break;
default:
return u8x8_d_ls013b7dh03_128x128(u8x8, msg, arg_int, arg_ptr);
}
return 1;
}
Reference in New Issue View Git Blame Copy Permalink