https://github.com/olikraus/u8g2 ChangeLog 2016-04-30 v2.0.1 olikraus@gmail.com * Support for DOGS102, ST7920, SSD1306 * Most graphics primitives are implemented 2016-05-15 v2.0.3 olikraus@gmail.com * Support for Adafruit FeatherWing 128x32 OLED * Added Wire.h support (I2C for SSD1306) * Successfully tested with Adafruit ESP8266 Feather Board (HW+SW I2C) * Successfully tested with Adafruit Feather M0 Basic Board (HW+SW I2C) 2016-06-12 v2.0.4 olikraus@gmail.com * Support for ST7565 2016-06-25 v2.0.6 olikraus@gmail.com * User interface functions * Little Rook Chess ported * ST7920 HW and SW SPI 2016-06-26 v2.0.7 olikraus@gmail.com * drawLine * GraphicsTest Example 2016-08-09 v2.1.5 olikraus@gmail.com * T6963 Support * Experimental Support for SSD1322 256x64 * A2 Thermoprinter Support * Added several fonts from http://int10h.org/oldschool-pc-fonts/ * Added Arabic, Greek and Cyrillic fonts. * Code cleanup (assert, spi modes, void * warning) 2016-08-17 v2.2.7 olikraus@gmail.com * U8x8: Upscale by 2 (Issue 41) * Fixed SSD1306 I2C procedures (mirror pixel in last tile column, issue 44) * Experimental support für mini12864 (pull request) * Use beginTransaction for SPI. This requires Arduino 1.6.0 2016-08-18 v2.3.2 olikraus@gmail.com * MINI12874; Fixed HW Flip Mode (pull request 49) * Fixed ST7920 HW SPI with very fast uC, issue 50 * Improved HW SPI for SH1106 and SSD1306 displays * Fixed issue with missing fonts 2016-08-21 v2.4.1 olikraus@gmail.com * Fixed HW SPI Modes (issue 52) 2016-10-01 v2.5.2 olikraus@gmail.com * Added crox fonts (issue 57) * Support for RA8835 (issue 45) * Added support for SSD1322 and SSD1325 * Added DrawXBMP (AVR: Assume bitmap in PROGMEM) * Added japanese fonts (issue 65) 2016-11-13 v2.6.3 olikraus@gmail.com * Added support for UC1610 (EA DOGXL160) * Use Wire.setClock() for improved HW I2C performance (issue 79). This requires Arduino IDE 1.6.0 or higher. * Added Thai Fonts (issue 73) * Added support for "\n" in the print function for u8x8 (issue 74) * Screen mirror option for U8g2 (issue 76) * Added support for second wire interface (Constructor postfix 2ND_HW_I2C) * Added support for UC1611 (EA DOGM240 and EA DOGXL240, issue 66) 2016-11-28 v2.7.5 olikraus@gmail.com * Added support for 0.66" 64x48 SSD1306 OLED (issue 89) * Support for UC1608 (issue 92) * Speed improvements for SW SPI und 8080 mode (issues 87, 90 and 95) * Fixed issue with ST7920 not using the optimized SW SPI procedures (issue 87) * Direct buffer API (issue 93) 2016-12-11 v2.8.4 olikraus@gmail.com * Increased contrast range for SSD1306 (issue 98) * Support for KS0108 (issue 88) * Support for UC1608 240x128 (issue 101) * Speed improvement (issue 96) 2016-12-12 v2.8.5 olikraus@gmail.com * Bugfix for issue 96 (issue 106) 2016-12-20 v2.9.1 olikraus@gmail.com * Speed improvement for AVR/KS0108 (issue 104) * Support for UC1604 (issue 111) * Support for PCD8544/Nokia Display (issue 107) * Change/fixed behavior of userInterfaceSelectionList (issue 112) 2016-12-23 v2.9.2 olikraus@gmail.com * Reverted the setup for SSD1306_NONAME to the original setup (undo issue 98) * Introduced SSD1306_VCOMH0 for the max range setup (issue 116) 2016-12-30 v2.10.1 olikraus@gmail.com * ST7565 LM6059 Display (issue 123) * SSD1606 eInk/ePaper Display (issue 100) * Documentation updates 2017-01-08 v2.11.4 olikraus@gmail.com * Support for LC7981 (issue 134) * Support for PCF8812 (issue 135) * Fixed wrong half-move notation in Little Rook Chess (issue 137) * Support for ST7567, Pax Instruments GLCD Shield (issue 138) * Support for NT7534 (issue 143) * Support for SSD1327, Seeedstudio OLED (issue 145) * Support for SSD1305 (issue 146) * Support for DOGM132 (issue 147) * Fixed a bug in the draw pixel procedure which appears in full buffer mode, if the display width is not a multiple of 8 (issue 148) * Added XOR mode (setDrawColor 2, issue 56) 2017-01-15 v2.12.6 olikraus@gmail.com * Support for SSD1309 (issue 113) * Enabled U8G2_HVLINE_SPEED_OPTIMIZATION (not sure why this was disabled) * Improved speed for ST7920 (up to 40%, issue 151) * Support for IST3020 (issue 153) 2017-02-07 v2.13.6 olikraus@gmail.com * Support for ST7588 (issue 154) * ESP8266: Avoid RAM copy of the fonts (issue 159) * Support for SSD1607 (issue 133) * Support for hardware pin remapping on the ESP8266 (issue 158) * Bugfix for the KS0108 support (issue 168) * More fonts: https://github.com/olikraus/u8g2/wiki/fntgrpnbp (issue 174) 2017-03-11 v2.14.7 olikraus@gmail.com * Bugfix: setFont does no longer resets the reference position (issue 195) * Support for ST7565 NHD C12864 (issue 186) * Support for SSD1329 128x96 OLED (issue 208) * Support for LC7981 240x128 (issue 193) * Performance improvement for the ST7920 (issue 200) 2017-05-22 v2.15.2 olikraus@gmail.com * Added setBitmapMode (pull request 220) Warning: Default behavior of drawXBM has changed in this release. * Increased SPI speed to 8MHz for SSD1306, SH1106 and SSD1322 (issue 215) * Added some more examples (issue 216) * Added Urdu, Bengali, Hebrew and Polish language fonts (issues 221, 246 and 266) * Added more examples (issue 216) * Updated code for NHD C12864 (issues 219 and 241) * Improved speed for HW SPI with SSD13xx OLEDs (issue 215) 2017-08-12 v2.16.9 olikraus@gmail.com * Fonts u8g2_font_unifont_t_korean1, u8g2_font_unifont_t_korean2 (issue 266) * Added support for 64128N ST7565 based display (issue 292) * Added extended fonts (_te, unicodes 32-701, issue 284) * Added support for MAX7219 (issue 280) * Performance optimization for SSD1322/25/27 (issue 302) * Fixed setContrast for SSD1322 (issue 328) * Support for 96x16 SSD1306 OLED (issue 295) * Fixed OldStandard-Bold fonts (osb, issue 306) * Support for SED1520/SBN1661 (issue 324) 2017-09-10 v2.17.11 olikraus@gmail.com * Additional _m_ and _h_ symbol fonts (issue 335) * Added parallel interfaces for several UC16xx devices (issue 339) * Support for IL3820, WaveShare 2.9" e-paper (issues 318 & 347) * Improved debounce algorithm (issue 338) * Power save mode for SSD1607 device (issue 352) 2017-09-30 v2.18.13 olikraus@gmail.com * Support for ST7567_JLX12864 (issue 365) * Support for UC1611 (no "s") (issue 339) * Fixed several issues related to the _F_ (full buffer) mode (issue 370) 2017-10-13 v2.19.8 olikraus@gmail.com * Support for UC1601 (issue 378) * Support for ESP32 I2C pin remapping (issue 377) * Support for ST75256 (SPI), JLX256128, JLX172104 (issue 163) * Added uw-ttyp0 fonts (issue 349) 2017-12-09 v2.20.13 olikraus@gmail.com * Bugfix for drawBitmap (issue 391) * I2C support for ST75256 (issue 384) * Support for SSD1327 128x128 display (issue 397) * Support for ST75256 JLX25664 display (issue 399) * Added keywords.txt (issue 402) * Experimental support for SSD1326 (issue 398) * Experimental alternative COM config for SSD1306 128x64 (issue 408) * New SH1106 init sequence (SH1106_WINSTAR, issue 316) * Support for SSD1322 NHD 128x64 (issue 412) * Fixed profont17 (issue 438) 2018-02-18 v2.21.8 olikraus@gmail.com * Support for SH1107 (issue 501) * Support for HX1230 (issue 469) * Bugfix for displays with display height not a multiple of 8 (issue 469) * FontUsage demo for full buffer mode (issue 490) * Added 1x2 (double height) draw procedures to U8x8 (issue 474) With this feature a 128x32 display can replace a 16x2 Char LCD. * New constructor for the Good Display 200x200 eInk (issue 454) * Update for the ST7920 device for more stable output (issue 487) * Double height (2x1) chars for U8x8 API (issue 474) * Excluded I2C for several ATMega uC which do not have HW I2C (issue 508) * Fixed UC1610 contrast command (issue 428) * Added WQY Chinese fonts at sizes 12, 13, 14, 15 and 16 including gb2312 support (issue 455) * Added new full buffer demo for the Chinese fonts (Shennong.ino, issue #455) * Added siji icon font u8g2_font_siji_t_6x10 (issue 451) 2018-04-30 v2.22.18 olikraus@gmail.com * Bugfix for draw1x2string (u8x8 API) * Changed return value for "begin()" (issue 518) * New feature: U8log, https://github.com/olikraus/u8g2/wiki/u8logreference * Added SSD1306 128x64 Adafruit OLED (issue 521) * Added Winstart SSD1306 64x48 OLED variant (issue 522) * Added support for JLX240160 (issue 556) * Added support for JLX12864 (ST7565 variant, issue 440) * Added support for JLX256160 (issue 561) * Added support for SH1122 256x64 OLED (issue 420) * Added open iconic icons (issue 535) * Added several Persian fonts (issue 541) * Added additional Japanese font variants (issue 581) * Added Devanagari/Hindi font variant (issue 584) * Added tom-thumb font (issue 563) * Added AVR specific optimization for 3-wire Software SPI (issue 586) 2018-08-24 v2.23.18 olikraus@gmail.com * NEW FONT FORMAT for speedup of the unicode font section (issue 596) * Fixed a bug in the font construction for monospaced fonts (issue 669) * Fixed a bug with the CS line for huge KS0108 displays (issue 631) * Fixed #if's for some AVR uC (issue 662) * Added support for SH1108 controller (issue 619) * Added support for T6963 160x80 Displays (issue 635) * Added support for EA W128128 (issue 641) * Added support for LC7981 240x64 (issue 642) * Added support for ST7567 ENH-DG128064 (issue 616) * Included pull request for ST7586, support for ERC240160 & s028hn118a (pull request 660) * Added SpaceTrash game (issue 622) * Added contributed 7-segment font, https://github.com/olikraus/u8g2/wiki/fntgrpu8g#7segments_26x42 (issue 634) * Added several fonts from fontstruct.com, https://github.com/olikraus/u8g2/wiki/fntgrpfontstruct (issue 687)# This also includes several outline fonts. 2018-10-28 v2.24.3 olikraus@gmail.com * Added clip window support (issue 364) * Added setBusClock() proc to change the I2C/SPI bus clock speed (Arduino only, issue 705) * Added sleep mode for ST7920 (issue 245) * Added support for SSD0323 (issue 720) 2019-02-09 v2.25.10 olikraus@gmail.com * Improved speed for I2C with SSD1306 controller: 4% faster now (issue 735) * Fixed code problems (issues 766 and 754) * Added battery symbols and emoticons (issue 747) * New U8x8 font format, added large U8x8 fonts (issue 771) * Added alternative version for ERC12864 (issue 790) * Added Waveshare SSD1607 200x200 support (issue 637) * Added support for SSD1318 (issue 784) * Partial display update with updateDisplayArea (issue 736) * Several new decorative and fancy fonts from pentacom.jp (issue 801) 2019-06-30 v2.26.14 olikraus@gmail.com * Support for Pimoroni 128x128 OLED SH1107 (issue 803) * Support for Grove 128x128 OLED SH1107 (issue 877) * Support for Winstar 256x128 ST75256 (ST75256_WO256X128, issue 891) * Bugfix: Open Iconic 1x for U8x8 (issue 828) * Added sendF command for direct communication with the display (issues 822, 878, 896) * Support for CG160160 UC1611 (issue 884) * Support for LM6063 128x64 ST7565 (issue 893) * Added fonts from pentacom (issue 810) * Support for ST7511 (issue 876) * Support for SSD1316 132x32 (issue 919) * Support for ST75320 (issue 921) * Added JLX256160M for mirrored version of the JLX256160 display (issue 930) * Unifont update to 12.1.02, added several plane 1 fonts (issue 931) * bdfconv.exe: Windows exe created, bugfix with -d option (issue 833) 2020-01-27 v2.27.6 olikraus@gmail.com * Support for IST7920 (issue 999). Note: IST7920 has nothing todo with ST7920 * Added screenshot/screencapture for full buffer mode (issue 1005) See: https://github.com/olikraus/u8g2/wiki/u8g2reference#writebufferpbm * Bugfix for draw 1x2 and 2x2 procedures for big 8x8 fonts (issue 1054) * Added fast software SPI support for Arduino Nano Every (issue 987) * Added "LoadFromSD" example to demonstrate reading XBM binary from SD card (issue #1059) * Added png to XBM binary conversion tool (https://github.com/olikraus/u8g2/tree/master/tools/png2bin) * Support for SSD1306 72x40 (issue 1047) * Bugfix for print() and setFontDirection() (issue 963) * Support for Visionox SSD1327 128x96 OLED (issue 1090) * Support for Open-Smart ST7567 128x64 LCD (issue 1088) * Added Lucida X11 fonts (issue 271) * Added several fonts from dafont.com (issue 1093) * Added 3-wire HW SPI (issue 1041) 2020-12-28 v2.28.10 olikraus@gmail.com * Added Euro Symbol to _te fonts (issue 1321) * Added support for ST7528 (issue 986) * Added support for ST7571 (issue 1298) * Added support for ST7586 YMC240160 (issue 1183) * Added support for UC1617 JLX128128 (issue 1151) * Added support for SH1106 Visionox 128X32 (issue 1250) * Added support for Raystar SSD1305 (issue 1111) * Added support for KS0713 controller (issue 1314) * Added support for ST7567_HEM6432 (issue 1159) * U8g2 16 Bit Mode enabled by default for ARM and ESP Systems (issue 1222) 2021-09-03 v2.29.11 olikraus@gmail.com * Update for getStrWidth/getUTF8Width: The new return value might be little bit larger (issue 1561) * New draw procedure drawButtonUTF8 (issue 1577) * Added vertical mirror option U8G2_MIRROR_VERTICAL for u8g2 (mattnutsch@gmail.com, issue 1474). * Added support for UC1638 based 196x96 display (issue 371) * Added support for HD44102 and T7932 displays (issue 1492) * Added support for SSD1320 (issue 1351) * Added support for S1D15721 (issue 1473) * Added support for SSD1306 EA OLEDS102 (issue 1493) * Added support for UC1601 128x64 (issue 1501) * Font Wiki page splitted into four sub-pages to avoid the GitHub 'abuse' message. 2021-09-07 v2.30.1 olikraus@gmail.com * Bugfix drawButtonUTF8 (added C++ code, issue 1577) 2021-09-19 v2.31.1 olikraus@gmail.com * Added icons from https://app.streamlinehq.com/icons/pixel (issue 1589) 2021-09-20 v2.31.2 olikraus@gmail.com * Bugfix release for include error (issues 1592 and 1594) 2022-04-03 v2.32.15 olikraus@gmail.com * SH1107 128x80 (issue 1598) * ST7920 256x32 (issue 1593) * ST7567 122x32 (issue 1759) * ST7571 128X96 (issue 1575) * SSD1312 (issue 1806) * ST7571 128x128 (bugfix issue 1576) * Added support for UC1609 (issue 1565) * Added support for GU800 series of Vacuum Fluorescent Displays (VFD, issue 1604) * Changed SPI Mode for Sharp displays (ls013..., issue 1771) * Added many more fonts (issues 1794, 1775, 1706, 1769) * Fixed several bugs and compiler errors 2022-09-04 v2.33.15 olikraus@gmail.com * ST7567 ERC13232 (issue 1869) * Bugfix for ST7567: (re-)added I2C and 3-wire-SPI (issue 1939) * ST7920 160x32 (issue 1873) * ST7586 JLX384160 (issue 1932) * LC7981 128X128, NOT TESTED (issue 1913) * SSD1316 96x32 (issue 1938, not tested, moved to 2.34.x) * GP1287AI 256X50, GP1247AI 253X63 contributed (issue 1907) * Added support for IST3088 (issue 1887) * Double size font functions: drawGlyphX2, drawStrX2, drawUTF8X2 (issue 1919) * Experimental support for ST75160, TESTING REQUIRED (issue 1642) * Bugfix font compression: Reduced fontsize by up to 4% (issue 1941) * Changed SPI mode for SH1106 from 3 to 0 (issue 1901) 2023-06-18 v2.34.22 olikraus@gmail.com * SSD1327 ZJY M150 128x128 (issue 1960) * SSD1316 96x32 (issue 1938) * SSD1322 240x128 (issue 2092) * SH1108 128x160 (issue 1998) * SSD1306 96x39 (issue 1959) * S1D15300 128x64, flip mode 1 not supported, (issue 2063) * SSD1362 256x64 (issue 1322, issue 2051) * ST75256 JLX160x80 (NOT TESTED, issue 2058) * UC1638 240x128 (issue 2075) * SED1330 320x200 (issue 1086) * Bugfix: Clear font_height_mode during setup to ensure correct default values in cases where the u8g2 struct / class is created via dynamic memory allocation (issue 2046) * Bugfix: Fix line draw procedure in 16 bit mode (issue 2053) * Added Spleen Monospaced Font from https://github.com/fcambus/spleen (issue 2015) * Extended the "E" font range with subscript characters if available in the original font (issue 2079) * Bugfix for ESP32 HW SPI Pin Remapping (issue 377, PR 2123) * Bugfix for LoadFromSD example (issue 2179) * Changed MUI_LABEL to support UTF8 (issue 2196) * Compiler Warning Cleanup for polygon draw (issue 1999, PR 2101) * Added MUI fixed width bar graph (issue 2200) * Added 04b fonts from u8glib (issue 2157) * Added "font_tiny5" (issue 2185) * Added MUI (https://github.com/olikraus/u8g2/wiki/muimanual) examples (issue 1747) 2023-xx-xx v2.35.x olikraus@gmail.com * ST7586S JLX320160 (no flipmode, no u8x8, issue 2186) * GP1294AI 256X48 (issue 2213, PR 2222) * Bugfix for drawUTF8X2 with negative x values (issue 2228) * UC1628 256x128 (tested), 256x32 (tested), 128x64 (not tested) (issue 2260): * U8x8 example for 90 degree string rotation (issue 2271) * ST7567 96x65 (issue 2332)