update, issue #2421
This commit is contained in:
kraus
parent
eb00ddd9f4
commit
f5efbbd712
|
|
@ -61,6 +61,21 @@ static const uint8_t u8x8_d_pcf8812_96x65_init_seq[] = {
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static const uint8_t u8x8_d_pcf8812_101x64_init_seq[] = {
|
||||||
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||||
|
U8X8_C(0x21), // PowerON, ExtCommandSet
|
||||||
|
U8X8_C(0x09), // Internal HV-gen x3
|
||||||
|
U8X8_C(0xB7), // Set Vop
|
||||||
|
U8X8_C(0x16), // Bias n=2 //15
|
||||||
|
U8X8_C(0x06), // Temperature coeff 2
|
||||||
|
U8X8_C(0x20), // StandartCommandSet
|
||||||
|
U8X8_C(0x0C), // normal mode, display non-inverted
|
||||||
|
U8X8_END_TRANSFER(), /* disable chip */
|
||||||
|
U8X8_END() /* end of sequence */
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
static const uint8_t u8x8_d_pcf8812_96x65_powersave0_seq[] = {
|
static const uint8_t u8x8_d_pcf8812_96x65_powersave0_seq[] = {
|
||||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||||
U8X8_C(0x020), /* power on */
|
U8X8_C(0x020), /* power on */
|
||||||
|
|
@ -157,6 +172,86 @@ static uint8_t u8x8_d_pcf8812_96x65_generic(u8x8_t *u8x8, uint8_t msg, uint8_t a
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static uint8_t u8x8_d_pcf8812_101x64_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||||
|
{
|
||||||
|
uint8_t x, c;
|
||||||
|
uint8_t *ptr;
|
||||||
|
switch(msg)
|
||||||
|
{
|
||||||
|
/* handled by the calling function
|
||||||
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||||
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_pcf8812_96x65_display_info);
|
||||||
|
break;
|
||||||
|
*/
|
||||||
|
case U8X8_MSG_DISPLAY_INIT:
|
||||||
|
u8x8_d_helper_display_init(u8x8);
|
||||||
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_101x64_init_seq);
|
||||||
|
break;
|
||||||
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
||||||
|
if ( arg_int == 0 )
|
||||||
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_powersave0_seq);
|
||||||
|
else
|
||||||
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_powersave1_seq);
|
||||||
|
break;
|
||||||
|
/*
|
||||||
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
||||||
|
if ( arg_int == 0 )
|
||||||
|
{
|
||||||
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_flip0_seq);
|
||||||
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_96x65_flip1_seq);
|
||||||
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
*/
|
||||||
|
#ifdef U8X8_WITH_SET_CONTRAST
|
||||||
|
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
||||||
|
u8x8_cad_StartTransfer(u8x8);
|
||||||
|
u8x8_cad_SendCmd(u8x8, 0x021 ); /* command mode, extended function set */
|
||||||
|
u8x8_cad_SendArg(u8x8, (arg_int>>1)|0x80 ); /* 0..127 for contrast */
|
||||||
|
u8x8_cad_EndTransfer(u8x8);
|
||||||
|
break;
|
||||||
|
#endif
|
||||||
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
||||||
|
u8x8_cad_StartTransfer(u8x8);
|
||||||
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
||||||
|
x *= 8;
|
||||||
|
x += u8x8->x_offset;
|
||||||
|
|
||||||
|
u8x8_cad_SendCmd(u8x8, 0x020 ); /* activate chip (PD=0), horizontal increment (V=0), enter normal command set (H=0) */
|
||||||
|
u8x8_cad_SendCmd(u8x8, 0x080 | x);
|
||||||
|
u8x8_cad_SendCmd(u8x8, 0x040 | ((u8x8_tile_t *)arg_ptr)->y_pos);
|
||||||
|
|
||||||
|
do
|
||||||
|
{
|
||||||
|
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
||||||
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
||||||
|
u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
|
||||||
|
/*
|
||||||
|
do
|
||||||
|
{
|
||||||
|
u8x8_cad_SendData(u8x8, 8, ptr);
|
||||||
|
ptr += 8;
|
||||||
|
c--;
|
||||||
|
} while( c > 0 );
|
||||||
|
*/
|
||||||
|
arg_int--;
|
||||||
|
} while( arg_int > 0 );
|
||||||
|
|
||||||
|
u8x8_cad_EndTransfer(u8x8);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
static const u8x8_display_info_t u8x8_pcf8812_96x65_display_info =
|
static const u8x8_display_info_t u8x8_pcf8812_96x65_display_info =
|
||||||
{
|
{
|
||||||
/* chip_enable_level = */ 0,
|
/* chip_enable_level = */ 0,
|
||||||
|
|
@ -216,18 +311,7 @@ static const u8x8_display_info_t u8x8_pcf8812_101x64_display_info =
|
||||||
/* pixel_height = */ 64
|
/* pixel_height = */ 64
|
||||||
};
|
};
|
||||||
|
|
||||||
static const uint8_t u8x8_d_pcf8812_101x64_init_seq[] = {
|
|
||||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
||||||
U8X8_C(0x21), // PowerON, ExtCommandSet
|
|
||||||
U8X8_C(0x09), // Internal HV-gen x3
|
|
||||||
U8X8_C(0xB7), // Set Vop
|
|
||||||
U8X8_C(0x16), // Bias n=2 //15
|
|
||||||
U8X8_C(0x06), // Temperature coeff 2
|
|
||||||
U8X8_C(0x20), // StandartCommandSet
|
|
||||||
U8X8_C(0x0C), // normal mode, display non-inverted
|
|
||||||
U8X8_END_TRANSFER(), /* disable chip */
|
|
||||||
U8X8_END() /* end of sequence */
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
uint8_t u8x8_d_pcf8812_101x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
uint8_t u8x8_d_pcf8812_101x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||||
|
|
@ -242,6 +326,6 @@ uint8_t u8x8_d_pcf8812_101x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
|
||||||
u8x8_d_helper_display_init(u8x8);
|
u8x8_d_helper_display_init(u8x8);
|
||||||
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_101x64_init_seq);
|
u8x8_cad_SendSequence(u8x8, u8x8_d_pcf8812_101x64_init_seq);
|
||||||
}
|
}
|
||||||
return u8x8_d_pcf8812_96x65_generic(u8x8, msg, arg_int, arg_ptr);
|
return u8x8_d_pcf8812_101x64_generic(u8x8, msg, arg_int, arg_ptr);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue