wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

issue #1998

This commit is contained in:
kraus 2022-11-05 23:32:51 +01:00
parent d987608d40
commit d01d4282e2
2 changed files with 75 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
csrc/u8x8.h
View File

@ -865,6 +865,7 @@ uint8_t u8x8_d_sh1107_pimoroni_128x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_in
uint8_t u8x8_d_sh1107_seeed_128x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sh1107_hjr_oel1m0201_96x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sh1107_tk078f288_80x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sh1108_128x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sh1108_160x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sh1122_256x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_st7920_160x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);

74
csrc/u8x8_d_sh1108.c
View File

@ -223,3 +223,77 @@ uint8_t u8x8_d_sh1108_160x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
}
/*==================================================*/
/* issue #1998, 128x160 OLED */
static const uint8_t u8x8_d_sh1108_128x160_noname_init_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C(0x0ae), /* display off */
U8X8_CA(0x0d5, 0x060), /* clock divide ratio and oscillator frequency */
U8X8_CA(0x0a9, 0x003), /* set display resolution, 0=64x160, 1=96x160, 2=128x160, 3=160x160 */
U8X8_C(0x020), /* addressing mode */
U8X8_CA(0x081, 0x01f), /* set contrast control */
U8X8_CA(0x0ad, 0x80), /* DC/DC control 80=Use external Vpp, 89=Use internal DC/DC*/
U8X8_C(0x030), /* set discharge VSL level, 0x030..0x03f */
U8X8_CA(0x0d9, 0x028), /* pre-charge period */
U8X8_CA(0x0db, 0x035), /* vcomh deselect level */
U8X8_CA(0x0dc, 0x035), /* VSEGM Deselect Level */
U8X8_C(0x0a0), /* segment remap a0/a1*/
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
U8X8_C(0x0a4), /* output ram to display */
U8X8_C(0x0a6), /* none inverted normal display mode */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const u8x8_display_info_t u8x8_sh1108_128x160_noname_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 60,
/* pre_chip_disable_wait_ns = */ 120,
/* reset_pulse_width_ms = */ 100, /* sh1108: 3 us */
/* post_reset_wait_ms = */ 100, /* sometimes OLEDs need much longer setup time */
/* sda_setup_time_ns = */ 100, /* sh1108: 100ns */
/* sck_pulse_width_ns = */ 100, /* sh1108: 100ns */
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 40,
/* write_pulse_width_ns = */ 150, /* sh1108: cycle time is 300ns, so use 300/2 = 150 */
/* tile_width = */ 16,
/* tile_height = */ 20,
/* default_x_offset = */ 16,
/* flipmode_x_offset = */ 16,
/* pixel_width = */ 128,
/* pixel_height = */ 160
};
uint8_t u8x8_d_sh1108_128x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
if ( u8x8_d_sh1108_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
return 1;
switch(msg)
{
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_sh1108_128x160_noname_init_seq);
break;
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1108_128x160_noname_display_info);
break;
default:
return 0;
}
return 1;
}
/*==================================================*/