update
This commit is contained in:
olikraus
parent
8b6b32f43a
commit
c32fe1581c
|
|
@ -0,0 +1,148 @@
|
|||
#
|
||||
# Generic and Simple GNU ARM Makefile
|
||||
#
|
||||
# Desinged for the gnu-arm-none-eabi tool chain
|
||||
#
|
||||
# Features
|
||||
# - create hex file
|
||||
# - create assembler listing (.dis)
|
||||
#
|
||||
# Limitations
|
||||
# - only C-files supported
|
||||
# - no automatic dependency checking (call 'make clean' if any .h files are changed)
|
||||
#
|
||||
# Targets:
|
||||
# make
|
||||
# create hex file, no upload
|
||||
# make upload
|
||||
# create and upload hex file
|
||||
# make clean
|
||||
# delete all generated files
|
||||
#
|
||||
# Note:
|
||||
# Display list make database: make -p -f/dev/null | less
|
||||
#
|
||||
#================================================
|
||||
# External tools
|
||||
|
||||
# The base directory of gcc-arm-none-eabi
|
||||
# Can be empty on Ubuntu and installed gcc-arm-none-eabi
|
||||
# If set, GCCBINPATH must contain a "/" at the end.
|
||||
GCCBINPATH:=/usr/bin/
|
||||
|
||||
#================================================
|
||||
# Project Information
|
||||
|
||||
# The name for the project
|
||||
TARGETNAME:=adc_test
|
||||
|
||||
# The source files of the project
|
||||
CSRC:=$(wildcard *.c)
|
||||
SSRC:=$(wildcard ../stm32l0xx/src/*.s)
|
||||
|
||||
# The CPU architecture (will be used for -mcpu)
|
||||
# for the LPC824, can we use "cortex-m0plus"?
|
||||
MCPU:=cortex-m0plus
|
||||
|
||||
# Include directory for the system include files
|
||||
SYSINC:=../stm32l0xx/inc
|
||||
SYSSRC:=$(wildcard ../stm32l0xx/src/*.c)
|
||||
|
||||
# Include directory for the u8g2 include files
|
||||
U8G2INC:=../../../../csrc/
|
||||
U8G2SRC:=$(wildcard ../../../../csrc/*.c)
|
||||
|
||||
# directory for FatFS
|
||||
#FFINC:=../fatfs
|
||||
#FFSRC:=$(wildcard ../fatfs/*.c)
|
||||
|
||||
# Directory for the linker script
|
||||
LDSCRIPTDIR:=.
|
||||
# Name of the linker script (must be the "keep" script, because the other script is not always working)
|
||||
LDSCRIPT:=stm32l031x6.ld
|
||||
|
||||
#================================================
|
||||
# Main part of the Makefile starts here. Usually no changes are needed.
|
||||
|
||||
# Internal Variable Names
|
||||
LIBNAME:=$(TARGETNAME).a
|
||||
ELFNAME:=$(TARGETNAME).elf
|
||||
HEXNAME:=$(TARGETNAME).hex
|
||||
DISNAME:=$(TARGETNAME).dis
|
||||
MAPNAME:=$(TARGETNAME).map
|
||||
OBJ:=$(CSRC:.c=.o) $(SSRC:.s=.o) $(SYSSRC:.c=.o) $(U8G2SRC:.c=.o)
|
||||
# $(SYSSRC:.c=.o) $(FFSRC:.c=.o)
|
||||
|
||||
# Replace standard build tools by arm tools
|
||||
AS:=$(GCCBINPATH)arm-none-eabi-as
|
||||
CC:=$(GCCBINPATH)arm-none-eabi-gcc
|
||||
AR:=$(GCCBINPATH)arm-none-eabi-ar
|
||||
OBJCOPY:=$(GCCBINPATH)arm-none-eabi-objcopy
|
||||
OBJDUMP:=$(GCCBINPATH)arm-none-eabi-objdump
|
||||
SIZE:=$(GCCBINPATH)arm-none-eabi-size
|
||||
|
||||
# Common flags
|
||||
COMMON_FLAGS = -mthumb -mcpu=$(MCPU)
|
||||
COMMON_FLAGS += -DSTM32L031xx
|
||||
COMMON_FLAGS += -Wall -I. -I$(SYSINC) -I$(U8G2INC)
|
||||
# define stack size (defaults to 0x0100)
|
||||
# COMMON_FLAGS += -D__STACK_SIZE=0x0100
|
||||
# COMMON_FLAGS += -Os -flto
|
||||
COMMON_FLAGS += -Os
|
||||
# COMMON_FLAGS += -fstack-protector
|
||||
# COMMON_FLAGS += -finstrument-functions
|
||||
# Do not use stand libs startup code. Uncomment this for gcclib procedures
|
||||
# memcpy still works, but might be required for __aeabi_uidiv
|
||||
# COMMON_FLAGS += -nostdlib
|
||||
# remove unused data and function
|
||||
#COMMON_FLAGS += -ffunction-sections -fdata-sections -fshort-wchar
|
||||
COMMON_FLAGS += -ffunction-sections -fdata-sections
|
||||
# C flags
|
||||
CFLAGS:=$(COMMON_FLAGS) -std=gnu99
|
||||
# LD flags
|
||||
# remove unreferenced procedures and variables, but __isr_vector
|
||||
GC:=-Wl,--gc-sections -Wl,--undefined=__isr_vector
|
||||
MAP:=-Wl,-Map=$(MAPNAME)
|
||||
LFLAGS:=$(COMMON_FLAGS) $(GC) $(MAP)
|
||||
#LDLIBS:=--specs=nosys.specs -lc -lc -lnosys -L$(LDSCRIPTDIR) -T $(LDSCRIPT)
|
||||
LDLIBS:=--specs=nosys.specs -L$(LDSCRIPTDIR) -T $(LDSCRIPT)
|
||||
|
||||
# Additional Suffixes
|
||||
.SUFFIXES: .elf .hex .bin .dis
|
||||
|
||||
# Targets
|
||||
.PHONY: all
|
||||
all: $(DISNAME) $(HEXNAME)
|
||||
$(SIZE) $(ELFNAME)
|
||||
|
||||
.PHONY: upload
|
||||
upload: $(DISNAME) $(HEXNAME) $(ELFNAME)
|
||||
stm32flash -e 255 -g 0 -w $(HEXNAME) -v /dev/ttyUSB0
|
||||
$(SIZE) $(ELFNAME)
|
||||
|
||||
.PHONY: clean
|
||||
clean:
|
||||
$(RM) $(OBJ) $(HEXNAME) $(ELFNAME) $(LIBNAME) $(DISNAME) $(MAPNAME) libssp.a libssp_nonshared.a
|
||||
|
||||
# implicit rules
|
||||
.elf.hex:
|
||||
$(OBJCOPY) -O ihex $< $@
|
||||
|
||||
|
||||
|
||||
# explicit rules
|
||||
|
||||
$(ELFNAME): $(LIBNAME)($(OBJ)) libssp.a libssp_nonshared.a
|
||||
$(LINK.o) $(LFLAGS) $(LIBNAME) $(LDLIBS) -o $@
|
||||
|
||||
$(DISNAME): $(ELFNAME)
|
||||
$(OBJDUMP) -D -S $< > $@
|
||||
|
||||
# create empty ssp libs for -fstack-protector-all -fstack-protector
|
||||
libssp.a:
|
||||
$(AR) rcs $@
|
||||
|
||||
libssp_nonshared.a:
|
||||
$(AR) rcs $@
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,129 @@
|
|||
/*
|
||||
delay.c
|
||||
|
||||
The delay function delay_micro_seconds() will use the global variable
|
||||
SystemCoreClock. A call to SystemCoreClockUpdate() is required before
|
||||
using delay_micro_seconds().
|
||||
|
||||
STM32L031 Project (U8g2 Library)
|
||||
|
||||
Copyright (c) 2017, olikraus@gmail.com
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright notice, this list
|
||||
of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright notice, this
|
||||
list of conditions and the following disclaimer in the documentation and/or other
|
||||
materials provided with the distribution.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||||
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
|
||||
*/
|
||||
|
||||
#include "stm32l031xx.h"
|
||||
|
||||
/* Generic ARM delay procedure, based on the system timer (SysTick) */
|
||||
|
||||
/*
|
||||
Delay by the provided number of system ticks.
|
||||
The delay must be smaller than the RELOAD value.
|
||||
This delay has an imprecision of about +/- 20 system ticks.
|
||||
*/
|
||||
static void _delay_system_ticks_sub(uint32_t sys_ticks)
|
||||
{
|
||||
uint32_t start_val, end_val, curr_val;
|
||||
uint32_t load;
|
||||
|
||||
start_val = SysTick->VAL;
|
||||
start_val &= 0x0ffffffUL;
|
||||
end_val = start_val;
|
||||
|
||||
if ( end_val < sys_ticks )
|
||||
{
|
||||
/* check, if the operation after this if clause would lead to a negative result */
|
||||
/* if this would be the case, then add the reload value first */
|
||||
load = SysTick->LOAD;
|
||||
load &= 0x0ffffffUL;
|
||||
end_val += load;
|
||||
}
|
||||
/* counter goes towards zero, so end_val is below start value */
|
||||
end_val -= sys_ticks;
|
||||
|
||||
|
||||
/* wait until interval is left */
|
||||
if ( start_val >= end_val )
|
||||
{
|
||||
for(;;)
|
||||
{
|
||||
curr_val = SysTick->VAL;
|
||||
curr_val &= 0x0ffffffUL;
|
||||
if ( curr_val <= end_val )
|
||||
break;
|
||||
if ( curr_val > start_val )
|
||||
break;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
for(;;)
|
||||
{
|
||||
curr_val = SysTick->VAL;
|
||||
curr_val &= 0x0ffffffUL;
|
||||
if ( curr_val <= end_val && curr_val > start_val )
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
Delay by the provided number of system ticks.
|
||||
Any values between 0 and 0x0ffffffff are allowed.
|
||||
*/
|
||||
void delay_system_ticks(uint32_t sys_ticks)
|
||||
{
|
||||
uint32_t load4;
|
||||
load4 = SysTick->LOAD;
|
||||
load4 &= 0x0ffffffUL;
|
||||
load4 >>= 2;
|
||||
|
||||
while ( sys_ticks > load4 )
|
||||
{
|
||||
sys_ticks -= load4;
|
||||
_delay_system_ticks_sub(load4);
|
||||
}
|
||||
_delay_system_ticks_sub(sys_ticks);
|
||||
}
|
||||
|
||||
/*
|
||||
Delay by the provided number of micro seconds.
|
||||
Limitation: "us" * System-Freq in MHz must not overflow in 32 bit.
|
||||
Values between 0 and 1.000.000 (1 second) are ok.
|
||||
|
||||
Important: Call SystemCoreClockUpdate() before calling this function.
|
||||
*/
|
||||
void delay_micro_seconds(uint32_t us)
|
||||
{
|
||||
uint32_t sys_ticks;
|
||||
|
||||
sys_ticks = SystemCoreClock;
|
||||
sys_ticks /=1000000UL;
|
||||
sys_ticks *= us;
|
||||
delay_system_ticks(sys_ticks);
|
||||
}
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
/*
|
||||
delay.h
|
||||
|
||||
LPC11U3x GPS Logger (https://github.com/olikraus/lpc11u3x-gps-logger)
|
||||
|
||||
Copyright (c) 2016, olikraus@gmail.com
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright notice, this list
|
||||
of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above copyright notice, this
|
||||
list of conditions and the following disclaimer in the documentation and/or other
|
||||
materials provided with the distribution.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||||
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||||
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
*/
|
||||
|
||||
#ifndef _DELAY_H
|
||||
#define _DELAY_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/*
|
||||
Delay by the provided number of system ticks.
|
||||
Any values between 0 and 0x0ffffffff are allowed.
|
||||
*/
|
||||
void delay_system_ticks(uint32_t sys_ticks);
|
||||
|
||||
/*
|
||||
Delay by the provided number of micro seconds.
|
||||
Limitation: "us" * System-Freq in MHz must now overflow in 32 bit.
|
||||
Values between 0 and 1.000.000 (1 second) are ok.
|
||||
|
||||
Important: Call SystemCoreClockUpdate() before calling this function.
|
||||
*/
|
||||
void delay_micro_seconds(uint32_t us);
|
||||
|
||||
#endif /* _DELAY_H */
|
||||
|
|
@ -0,0 +1,383 @@
|
|||
/*
|
||||
|
||||
Example for the STM32L031 Eval Board with 128x64 OLED at PA13/PA14
|
||||
|
||||
LED: PA1 / AF2: TIM2_CH2
|
||||
VarRes: PA5 / ADC CH5
|
||||
|
||||
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include "stm32l031xx.h"
|
||||
#include "delay.h"
|
||||
#include "u8x8.h"
|
||||
|
||||
/*=======================================================================*/
|
||||
/* external functions */
|
||||
uint8_t u8x8_gpio_and_delay_stm32l0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
|
||||
/*=======================================================================*/
|
||||
/* global variables */
|
||||
|
||||
u8x8_t u8x8; // u8x8 object
|
||||
uint8_t u8x8_x, u8x8_y; // current position on the screen
|
||||
|
||||
volatile unsigned long SysTickCount = 0;
|
||||
|
||||
/*=======================================================================*/
|
||||
|
||||
void __attribute__ ((interrupt, used)) SysTick_Handler(void)
|
||||
{
|
||||
SysTickCount++;
|
||||
}
|
||||
|
||||
|
||||
|
||||
void setHSIClock()
|
||||
{
|
||||
|
||||
/* test if the current clock source is something else than HSI */
|
||||
if ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
||||
{
|
||||
/* enable HSI */
|
||||
RCC->CR |= RCC_CR_HSION;
|
||||
/* wait until HSI becomes ready */
|
||||
while ( (RCC->CR & RCC_CR_HSIRDY) == 0 )
|
||||
;
|
||||
|
||||
/* enable the HSI "divide by 4" bit */
|
||||
RCC->CR |= (uint32_t)(RCC_CR_HSIDIVEN);
|
||||
/* wait until the "divide by 4" flag is enabled */
|
||||
while((RCC->CR & RCC_CR_HSIDIVF) == 0)
|
||||
;
|
||||
|
||||
|
||||
/* then use the HSI clock */
|
||||
RCC->CFGR = (RCC->CFGR & (uint32_t) (~RCC_CFGR_SW)) | RCC_CFGR_SW_HSI;
|
||||
|
||||
/* wait until HSI clock is used */
|
||||
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
||||
;
|
||||
}
|
||||
|
||||
/* disable PLL */
|
||||
RCC->CR &= (uint32_t)(~RCC_CR_PLLON);
|
||||
/* wait until PLL is inactive */
|
||||
while((RCC->CR & RCC_CR_PLLRDY) != 0)
|
||||
;
|
||||
|
||||
/* set latency to 1 wait state */
|
||||
FLASH->ACR |= FLASH_ACR_LATENCY;
|
||||
|
||||
/* At this point the HSI runs with 4 MHz */
|
||||
/* Multiply by 16 device by 2 --> 32 MHz */
|
||||
RCC->CFGR = (RCC->CFGR & (~(RCC_CFGR_PLLMUL| RCC_CFGR_PLLDIV ))) | (RCC_CFGR_PLLMUL16 | RCC_CFGR_PLLDIV2);
|
||||
|
||||
/* enable PLL */
|
||||
RCC->CR |= RCC_CR_PLLON;
|
||||
|
||||
/* wait until the PLL is ready */
|
||||
while ((RCC->CR & RCC_CR_PLLRDY) == 0)
|
||||
;
|
||||
|
||||
/* use the PLL has clock source */
|
||||
RCC->CFGR |= (uint32_t) (RCC_CFGR_SW_PLL);
|
||||
/* wait until the PLL source is active */
|
||||
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL)
|
||||
;
|
||||
|
||||
SystemCoreClockUpdate(); /* Update SystemCoreClock global variable */
|
||||
}
|
||||
|
||||
/*
|
||||
Enable several power regions: PWR, GPIOA
|
||||
|
||||
This must be executed after each reset.
|
||||
*/
|
||||
void startUp(void)
|
||||
{
|
||||
RCC->IOPENR |= RCC_IOPENR_IOPAEN; /* Enable clock for GPIO Port A */
|
||||
RCC->APB1ENR |= RCC_APB1ENR_PWREN; /* enable power interface (PWR) */
|
||||
PWR->CR |= PWR_CR_DBP; /* activate write access to RCC->CSR and RTC */
|
||||
|
||||
SysTick->LOAD = (SystemCoreClock/1000)*50 - 1; /* 50ms task */
|
||||
SysTick->VAL = 0;
|
||||
SysTick->CTRL = 7; /* enable, generate interrupt (SysTick_Handler), do not divide by 2 */
|
||||
}
|
||||
|
||||
/*=======================================================================*/
|
||||
/* u8x8 display procedures */
|
||||
|
||||
void initDisplay(void)
|
||||
{
|
||||
u8x8_Setup(&u8x8, u8x8_d_ssd1306_128x64_noname, u8x8_cad_ssd13xx_i2c, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_stm32l0);
|
||||
u8x8_InitDisplay(&u8x8);
|
||||
u8x8_ClearDisplay(&u8x8);
|
||||
u8x8_SetPowerSave(&u8x8, 0);
|
||||
u8x8_SetFont(&u8x8, u8x8_font_amstrad_cpc_extended_r);
|
||||
u8x8_x = 0;
|
||||
u8x8_y = 0;
|
||||
}
|
||||
|
||||
|
||||
void outChar(uint8_t c)
|
||||
{
|
||||
if ( u8x8_x >= u8x8_GetCols(&u8x8) )
|
||||
{
|
||||
u8x8_x = 0;
|
||||
u8x8_y++;
|
||||
}
|
||||
u8x8_DrawGlyph(&u8x8, u8x8_x, u8x8_y, c);
|
||||
u8x8_x++;
|
||||
}
|
||||
|
||||
void outStr(const char *s)
|
||||
{
|
||||
while( *s )
|
||||
outChar(*s++);
|
||||
}
|
||||
|
||||
void outHexHalfByte(uint8_t b)
|
||||
{
|
||||
b &= 0x0f;
|
||||
if ( b < 10 )
|
||||
outChar(b+'0');
|
||||
else
|
||||
outChar(b+'a'-10);
|
||||
}
|
||||
|
||||
void outHex8(uint8_t b)
|
||||
{
|
||||
outHexHalfByte(b >> 4);
|
||||
outHexHalfByte(b);
|
||||
}
|
||||
|
||||
void outHex16(uint16_t v)
|
||||
{
|
||||
outHex8(v>>8);
|
||||
outHex8(v);
|
||||
}
|
||||
|
||||
void outHex32(uint32_t v)
|
||||
{
|
||||
outHex16(v>>16);
|
||||
outHex16(v);
|
||||
}
|
||||
|
||||
void setRow(uint8_t r)
|
||||
{
|
||||
u8x8_x = 0;
|
||||
u8x8_y = r;
|
||||
}
|
||||
|
||||
/*=======================================================================*/
|
||||
|
||||
void initADC(void)
|
||||
{
|
||||
//__disable_irq();
|
||||
|
||||
/* ADC Clock Enable */
|
||||
|
||||
RCC->APB2ENR |= RCC_APB2ENR_ADCEN; /* enable ADC clock */
|
||||
__NOP(); /* let us wait for some time */
|
||||
__NOP(); /* let us wait for some time */
|
||||
|
||||
/* ADC Reset */
|
||||
|
||||
RCC->APB2RSTR |= RCC_APB2RSTR_ADCRST;
|
||||
__NOP(); /* let us wait for some time */
|
||||
__NOP(); /* let us wait for some time */
|
||||
RCC->APB2RSTR &= ~RCC_APB2RSTR_ADCRST;
|
||||
__NOP(); /* let us wait for some time */
|
||||
__NOP(); /* let us wait for some time */
|
||||
|
||||
/* ADC Basic Setup */
|
||||
|
||||
ADC1->IER = 0; /* do not allow any interrupts */
|
||||
ADC1->CFGR2 &= ~ADC_CFGR2_CKMODE; /* select HSI16 clock */
|
||||
|
||||
ADC1->CR |= ADC_CR_ADVREGEN; /* enable ADC voltage regulator, probably not required, because this is automatically activated */
|
||||
ADC->CCR |= ADC_CCR_VREFEN; /* Wake-up the VREFINT */
|
||||
ADC->CCR |= ADC_CCR_TSEN; /* Wake-up the temperature sensor */
|
||||
|
||||
__NOP(); /* let us wait for some time */
|
||||
__NOP(); /* let us wait for some time */
|
||||
|
||||
/* CALIBRATION */
|
||||
|
||||
if ((ADC1->CR & ADC_CR_ADEN) != 0) /* clear ADEN flag if required */
|
||||
{
|
||||
ADC1->CR &= (uint32_t)(~ADC_CR_ADEN);
|
||||
}
|
||||
ADC1->CR |= ADC_CR_ADCAL; /* start calibration */
|
||||
while ((ADC1->ISR & ADC_ISR_EOCAL) == 0) /* wait for clibration finished */
|
||||
{
|
||||
}
|
||||
ADC1->ISR |= ADC_ISR_EOCAL; /* clear the status flag, by writing 1 to it */
|
||||
__NOP(); /* not sure why, but some nop's are required here, at least 4 of them */
|
||||
__NOP();
|
||||
__NOP();
|
||||
__NOP();
|
||||
__NOP();
|
||||
__NOP();
|
||||
|
||||
/* ENABLE ADC */
|
||||
|
||||
ADC1->ISR |= ADC_ISR_ADRDY; /* clear ready flag */
|
||||
ADC1->CR |= ADC_CR_ADEN; /* enable ADC */
|
||||
while ((ADC1->ISR & ADC_ISR_ADRDY) == 0) /* wait for ADC */
|
||||
{
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
ch0 PA0 pin 6
|
||||
ch1 PA1 pin 7
|
||||
ch2 PA2 pin 8
|
||||
ch3 PA3 pin 9
|
||||
ch4 PA4 pin 10
|
||||
ch5 PA5 pin 11
|
||||
ch6 PA6 pin 12
|
||||
ch7 PA7 pin 13
|
||||
ch8 PB0 -
|
||||
ch9 PB1 pin 14
|
||||
|
||||
|
||||
ch 0..15: GPIO
|
||||
ch 16: ???
|
||||
ch 17: vref (bandgap)
|
||||
ch18: temperature sensor
|
||||
|
||||
returns 12 bit result, right aligned
|
||||
*/
|
||||
uint16_t getADC(uint8_t ch)
|
||||
{
|
||||
uint32_t data;
|
||||
uint32_t i;
|
||||
|
||||
/* CONFIGURE ADC */
|
||||
|
||||
ADC1->CFGR1 &= ~ADC_CFGR1_EXTEN; /* software enabled conversion start */
|
||||
ADC1->CFGR1 &= ~ADC_CFGR1_ALIGN; /* right alignment */
|
||||
ADC1->CFGR1 &= ~ADC_CFGR1_RES; /* 12 bit resolution */
|
||||
ADC1->CHSELR = 1<<ch; /* Select channel */
|
||||
ADC1->SMPR |= ADC_SMPR_SMP_0 | ADC_SMPR_SMP_1 | ADC_SMPR_SMP_2; /* Select a sampling mode of 111 (very slow)*/
|
||||
|
||||
/* DO CONVERSION */
|
||||
|
||||
data = 0;
|
||||
for( i = 0; i < 8; i++ )
|
||||
{
|
||||
|
||||
ADC1->CR |= ADC_CR_ADSTART; /* start the ADC conversion */
|
||||
while ((ADC1->ISR & ADC_ISR_EOC) == 0) /* wait end of conversion */
|
||||
{
|
||||
}
|
||||
data += ADC1->DR; /* get ADC result and clear the ISR_EOC flag */
|
||||
}
|
||||
data >>= 3;
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
/*=======================================================================*/
|
||||
|
||||
void initTIM(void)
|
||||
{
|
||||
/* enable clock for TIM2 */
|
||||
RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
|
||||
|
||||
/*enable clock for GPIOA */
|
||||
RCC->IOPENR |= RCC_IOPENR_IOPAEN; /* Enable clock for GPIO Port A */
|
||||
|
||||
__NOP(); /* extra delay for clock stabilization required? */
|
||||
__NOP();
|
||||
|
||||
/* prescalar for AHB and APB1 */
|
||||
RCC->CFGR &= RCC_CFGR_HPRE;
|
||||
RCC->CFGR |= RCC_CFGR_HPRE_DIV1;
|
||||
RCC->CFGR &= RCC_CFGR_PPRE1;
|
||||
RCC->CFGR |= RCC_CFGR_PPRE1_DIV1;
|
||||
|
||||
/* configure GPIOA PA1 for TIM2 */
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE1; /* clear mode for PA9 */
|
||||
GPIOA->MODER |= GPIO_MODER_MODE1_1; /* alt fn */
|
||||
GPIOA->OTYPER &= ~GPIO_OTYPER_OT_1; /* push-pull */
|
||||
GPIOA->AFR[0] &= ~(15<<4); /* Clear Alternate Function PA1 */
|
||||
GPIOA->AFR[0] |= 2<<4; /* AF2 Alternate Function PA1 */
|
||||
|
||||
/* TIM2 configure */
|
||||
/* clear everything, including the "Update disable" flag, so that updates */
|
||||
/* are generated */
|
||||
TIM2->CR1 = 0;
|
||||
TIM2->CR1 |= TIM_CR1_ARPE;
|
||||
/* Update request by manual UG bit setting or slave controller */
|
||||
/* both is not required here */
|
||||
/* so, update request by couter over/underflow remains */
|
||||
TIM2->CR1 |= TIM_CR1_URS; /* only udf/ovf generae events */
|
||||
|
||||
|
||||
TIM2->ARR = 4096; /* total cycle count */
|
||||
TIM2->CCR2 = 1024; /* duty cycle */
|
||||
TIM2->CCMR1 &= ~TIM_CCMR1_OC2CE; /* disable clear output compare 2 **/
|
||||
TIM2->CCMR1 |= TIM_CCMR1_OC2M; /* all 3 bits set: PWM Mode 2 */
|
||||
TIM2->CCMR1 |= TIM_CCMR1_OC2PE; /* preload enable */
|
||||
TIM2->CCMR1 &= ~TIM_CCMR1_OC2FE; /* fast disable */
|
||||
TIM2->CCMR1 &= ~TIM_CCMR1_CC2S; /* configure cc2 as output */
|
||||
|
||||
|
||||
TIM2->EGR = /* enable update event */
|
||||
TIM2->CCER = /* set output polarity */
|
||||
|
||||
|
||||
}
|
||||
|
||||
/*=======================================================================*/
|
||||
|
||||
void main()
|
||||
{
|
||||
uint16_t adc_value;
|
||||
uint16_t i;
|
||||
|
||||
setHSIClock(); /* enable 32 MHz Clock */
|
||||
startUp(); /* enable systick irq and several power regions */
|
||||
initDisplay(); /* aktivate display */
|
||||
initADC();
|
||||
|
||||
RCC->IOPENR |= RCC_IOPENR_IOPAEN; /* Enable clock for GPIO Port A */
|
||||
__NOP();
|
||||
__NOP();
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE1; /* clear mode for PA1 */
|
||||
GPIOA->MODER |= GPIO_MODER_MODE1_0; /* Output mode for PA1 */
|
||||
GPIOA->OTYPER &= ~GPIO_OTYPER_OT_1; /* no Push/Pull for PA1 */
|
||||
GPIOA->OSPEEDR &= ~GPIO_OSPEEDER_OSPEED1; /* low speed for PA1 */
|
||||
GPIOA->PUPDR &= ~GPIO_PUPDR_PUPD1; /* no pullup/pulldown for PA1 */
|
||||
GPIOA->BSRR = GPIO_BSRR_BS_1; /* atomic set PA1 */
|
||||
|
||||
setRow(0); outStr("ADC Test");
|
||||
|
||||
setRow(2); outStr("ch5 pin11: ");
|
||||
setRow(3); outHex16(getADC(5));
|
||||
setRow(4); outStr("bandgap: ");
|
||||
setRow(5); outHex16(getADC(17));
|
||||
setRow(6); outStr("temp: ");
|
||||
setRow(7); outHex16(getADC(18));
|
||||
|
||||
for(;;)
|
||||
{
|
||||
|
||||
for( i = 0; i < 2000; i++ )
|
||||
{
|
||||
adc_value = getADC(5);
|
||||
GPIOA->BSRR = GPIO_BSRR_BR_1; /* atomic clr PA1 */
|
||||
delay_system_ticks(0x1000 - adc_value);
|
||||
GPIOA->BSRR = GPIO_BSRR_BS_1; /* atomic set PA1 */
|
||||
delay_system_ticks(adc_value);
|
||||
}
|
||||
|
||||
setRow(3); outHex16(adc_value);
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,245 @@
|
|||
/*
|
||||
|
||||
stm32l031x6.ld
|
||||
|
||||
Modified for stm32l0 from the original nokeep.ld script from the
|
||||
arm-none-eabi examples by olikraus@gmail.com
|
||||
|
||||
Assuming, that the original nokeep.ld file is available under
|
||||
the GNU General Public License, this file is available under the
|
||||
same license.
|
||||
|
||||
There are three modifications:
|
||||
|
||||
1. Provide symbols for the stm32l0 startup code
|
||||
|
||||
The following symbols are required for the stm32l0 startup
|
||||
code (e.g. startup_stm32l031xx.s)
|
||||
|
||||
_sidata start address for the initialization values of the .data section
|
||||
_sdata start address for the .data section. defined in linker script
|
||||
_edata end address for the .data section. defined in linker script
|
||||
_sbss start address for the .bss section. defined in linker script
|
||||
_ebss end address for the .bss section. defined in linker script
|
||||
_estack top address of the stack
|
||||
|
||||
2. Stack size estimation / calculation
|
||||
|
||||
_Stack_Size has been added to allow better stack size calculation
|
||||
|
||||
3. KEEP keywords
|
||||
|
||||
Additionall KEEPs added for .init and .fini. Without this KEEP the
|
||||
generated code will not work, because of the missing _init function.
|
||||
|
||||
4. Bugfix: Allign the end of the flash area
|
||||
|
||||
*/
|
||||
|
||||
_Stack_Size = 0x400; /* stm32l0: estimated amount of stack */
|
||||
|
||||
|
||||
/* Linker script to configure memory regions.
|
||||
* Need modifying for a specific board.
|
||||
* FLASH.ORIGIN: starting address of flash
|
||||
* FLASH.LENGTH: length of flash
|
||||
* RAM.ORIGIN: starting address of RAM bank 0
|
||||
* RAM.LENGTH: length of RAM bank 0
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 32K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
|
||||
}
|
||||
|
||||
/* Linker script to place sections and symbol values. Should be used together
|
||||
* with other linker script that defines memory regions FLASH and RAM.
|
||||
* It references following symbols, which must be defined in code:
|
||||
* Reset_Handler : Entry of reset handler
|
||||
*
|
||||
* It defines following symbols, which code can use without definition:
|
||||
* __exidx_start
|
||||
* __exidx_end
|
||||
* __copy_table_start__
|
||||
* __copy_table_end__
|
||||
* __zero_table_start__
|
||||
* __zero_table_end__
|
||||
* __etext
|
||||
* __data_start__
|
||||
* __preinit_array_start
|
||||
* __preinit_array_end
|
||||
* __init_array_start
|
||||
* __init_array_end
|
||||
* __fini_array_start
|
||||
* __fini_array_end
|
||||
* __data_end__
|
||||
* __bss_start__
|
||||
* __bss_end__
|
||||
* __end__
|
||||
* end
|
||||
* __HeapLimit
|
||||
* __StackLimit
|
||||
* __StackTop
|
||||
* __stack
|
||||
*/
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text :
|
||||
{
|
||||
KEEP(*(.isr_vector))
|
||||
*(.text*)
|
||||
|
||||
/* the st32l0 startup code calls __libc_init_array, which calls the _init */
|
||||
/* ... sooo.... better keep the init and fini sections */
|
||||
|
||||
KEEP ( *(.init) )
|
||||
KEEP ( *(.fini) )
|
||||
|
||||
/* .ctors */
|
||||
*crtbegin.o(.ctors)
|
||||
*crtbegin?.o(.ctors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
||||
*(SORT(.ctors.*))
|
||||
*(.ctors)
|
||||
|
||||
/* .dtors */
|
||||
*crtbegin.o(.dtors)
|
||||
*crtbegin?.o(.dtors)
|
||||
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
||||
*(SORT(.dtors.*))
|
||||
*(.dtors)
|
||||
|
||||
*(.rodata*)
|
||||
|
||||
*(.eh_frame*)
|
||||
|
||||
/* allign the end of the flash area */
|
||||
. = ALIGN(4);
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = .;
|
||||
.ARM.exidx :
|
||||
{
|
||||
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
||||
} > FLASH
|
||||
__exidx_end = .;
|
||||
|
||||
/* To copy multiple ROM to RAM sections,
|
||||
* uncomment .copy.table section and,
|
||||
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
|
||||
/*
|
||||
.copy.table :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__copy_table_start__ = .;
|
||||
LONG (__etext)
|
||||
LONG (__data_start__)
|
||||
LONG (__data_end__ - __data_start__)
|
||||
LONG (__etext2)
|
||||
LONG (__data2_start__)
|
||||
LONG (__data2_end__ - __data2_start__)
|
||||
__copy_table_end__ = .;
|
||||
} > FLASH
|
||||
*/
|
||||
|
||||
/* To clear multiple BSS sections,
|
||||
* uncomment .zero.table section and,
|
||||
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
|
||||
/*
|
||||
.zero.table :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__zero_table_start__ = .;
|
||||
LONG (__bss_start__)
|
||||
LONG (__bss_end__ - __bss_start__)
|
||||
LONG (__bss2_start__)
|
||||
LONG (__bss2_end__ - __bss2_start__)
|
||||
__zero_table_end__ = .;
|
||||
} > FLASH
|
||||
*/
|
||||
|
||||
__etext = .;
|
||||
_sidata = .; /* for stm32l0 startup code */
|
||||
|
||||
.data : AT (__etext)
|
||||
{
|
||||
__data_start__ = .;
|
||||
_sdata = .; /* for stm32l0 startup code */
|
||||
*(vtable)
|
||||
*(.data*)
|
||||
|
||||
. = ALIGN(4);
|
||||
/* preinit data */
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
*(.preinit_array)
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
/* init data */
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
*(SORT(.init_array.*))
|
||||
*(.init_array)
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
|
||||
|
||||
. = ALIGN(4);
|
||||
/* finit data */
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
*(SORT(.fini_array.*))
|
||||
*(.fini_array)
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
|
||||
*(.jcr)
|
||||
. = ALIGN(4);
|
||||
/* All data end */
|
||||
__data_end__ = .;
|
||||
_edata = .; /* for stm32l0 startup code */
|
||||
|
||||
} > RAM
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bss_start__ = .;
|
||||
_sbss = .; /* for stm32l0 startup code */
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
__bss_end__ = .;
|
||||
_ebss = .; /* for stm32l0 startup code */
|
||||
} > RAM
|
||||
|
||||
.heap (COPY):
|
||||
{
|
||||
__end__ = .;
|
||||
PROVIDE(end = .);
|
||||
*(.heap*)
|
||||
__HeapLimit = .;
|
||||
} > RAM
|
||||
|
||||
/* .stack_dummy section doesn't contains any symbols. It is only
|
||||
* used for linker to calculate size of stack sections, and assign
|
||||
* values to stack symbols later */
|
||||
.stack_dummy (COPY):
|
||||
{
|
||||
*(.stack*)
|
||||
. = . + _Stack_Size; /* estimated stack size */
|
||||
} > RAM
|
||||
|
||||
/* Set stack top to end of RAM, and stack limit move down by
|
||||
* size of stack_dummy section */
|
||||
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_estack = __StackTop; /* for stm32l0 startup code */
|
||||
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
|
||||
PROVIDE(__stack = __StackTop);
|
||||
|
||||
/* Check if data + heap + stack exceeds RAM limit */
|
||||
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
|
||||
}
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
u8x8cb.c
|
||||
|
||||
STM32L031
|
||||
|
||||
PA13: Clock
|
||||
PA14: Data
|
||||
Both lines have a pullup resistor
|
||||
|
||||
*/
|
||||
|
||||
#include "stm32l031xx.h"
|
||||
#include "delay.h"
|
||||
#include "u8x8.h"
|
||||
|
||||
|
||||
uint8_t u8x8_gpio_and_delay_stm32l0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_GPIO_AND_DELAY_INIT:
|
||||
/* only support for software I2C*/
|
||||
|
||||
RCC->IOPENR |= RCC_IOPENR_IOPAEN; /* Enable clock for GPIO Port A */
|
||||
__NOP();
|
||||
__NOP();
|
||||
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE14; /* clear mode for PA10 */
|
||||
//GPIOA->MODER |= GPIO_MODER_MODE14_0; /* Output mode for PA10 */
|
||||
GPIOA->OTYPER &= ~GPIO_OTYPER_OT_14; /* no open drain for PA10 */
|
||||
GPIOA->OSPEEDR &= ~GPIO_OSPEEDER_OSPEED14; /* low speed for PA10 */
|
||||
GPIOA->PUPDR &= ~GPIO_PUPDR_PUPD14; /* no pullup/pulldown for PA10 */
|
||||
//GPIOA->BSRR = GPIO_BSRR_BS_14; /* atomic set PA10 */
|
||||
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE13; /* clear mode for PA9 */
|
||||
//GPIOA->MODER |= GPIO_MODER_MODE13_0; /* Output mode for PA9 */
|
||||
GPIOA->OTYPER &= ~GPIO_OTYPER_OT_13; /* no open drain for PA9 */
|
||||
GPIOA->OSPEEDR &= ~GPIO_OSPEEDER_OSPEED13; /* low speed for PA9 */
|
||||
GPIOA->PUPDR &= ~GPIO_PUPDR_PUPD13; /* no pullup/pulldown for PA9 */
|
||||
//GPIOA->BSRR = GPIO_BSRR_BS_13; /* atomic set PA9 */
|
||||
|
||||
break;
|
||||
case U8X8_MSG_DELAY_NANO:
|
||||
/* not required for SW I2C */
|
||||
break;
|
||||
|
||||
case U8X8_MSG_DELAY_10MICRO:
|
||||
/* not used at the moment */
|
||||
break;
|
||||
|
||||
case U8X8_MSG_DELAY_100NANO:
|
||||
/* not used at the moment */
|
||||
break;
|
||||
|
||||
case U8X8_MSG_DELAY_MILLI:
|
||||
delay_micro_seconds(arg_int*1000UL);
|
||||
break;
|
||||
case U8X8_MSG_DELAY_I2C:
|
||||
/* arg_int is 1 or 4: 100KHz (5us) or 400KHz (1.25us) */
|
||||
delay_micro_seconds(arg_int<=2?5:1);
|
||||
break;
|
||||
|
||||
case U8X8_MSG_GPIO_I2C_CLOCK:
|
||||
|
||||
if ( arg_int == 0 )
|
||||
{
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE13; /* clear mode for PA10 */
|
||||
GPIOA->MODER |= GPIO_MODER_MODE13_0; /* Output mode for PA10 */
|
||||
GPIOA->BSRR = GPIO_BSRR_BR_3; /* atomic clr PA9 */
|
||||
}
|
||||
else
|
||||
{
|
||||
//GPIOA->BSRR = GPIO_BSRR_BS_13; /* atomic set PA9 */
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE13; /* clear mode for PA9: input mode */
|
||||
}
|
||||
break;
|
||||
case U8X8_MSG_GPIO_I2C_DATA:
|
||||
|
||||
if ( arg_int == 0 )
|
||||
{
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE14; /* clear mode for PA10 */
|
||||
GPIOA->MODER |= GPIO_MODER_MODE14_0; /* Output mode for PA10 */
|
||||
GPIOA->BSRR = GPIO_BSRR_BR_14; /* atomic clr PA10 */
|
||||
}
|
||||
else
|
||||
{
|
||||
//GPIOA->BSRR = GPIO_BSRR_BS_14; /* atomic set PA10 */
|
||||
// input mode
|
||||
GPIOA->MODER &= ~GPIO_MODER_MODE14; /* clear mode for PA10: input mode */
|
||||
}
|
||||
break;
|
||||
/*
|
||||
case U8X8_MSG_GPIO_MENU_SELECT:
|
||||
u8x8_SetGPIOResult(u8x8, Chip_GPIO_GetPinState(LPC_GPIO, KEY_SELECT_PORT, KEY_SELECT_PIN));
|
||||
break;
|
||||
case U8X8_MSG_GPIO_MENU_NEXT:
|
||||
u8x8_SetGPIOResult(u8x8, Chip_GPIO_GetPinState(LPC_GPIO, KEY_NEXT_PORT, KEY_NEXT_PIN));
|
||||
break;
|
||||
case U8X8_MSG_GPIO_MENU_PREV:
|
||||
u8x8_SetGPIOResult(u8x8, Chip_GPIO_GetPinState(LPC_GPIO, KEY_PREV_PORT, KEY_PREV_PIN));
|
||||
break;
|
||||
|
||||
case U8X8_MSG_GPIO_MENU_HOME:
|
||||
u8x8_SetGPIOResult(u8x8, Chip_GPIO_GetPinState(LPC_GPIO, KEY_HOME_PORT, KEY_HOME_PIN));
|
||||
break;
|
||||
*/
|
||||
default:
|
||||
u8x8_SetGPIOResult(u8x8, 1);
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
/* I2C Test */
|
||||
/* STM32L031 Eval Board: I2C Test */
|
||||
|
||||
#include "stm32l031xx.h"
|
||||
#include "delay.h"
|
||||
|
|
|
|||
Loading…
Reference in New Issue