wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

restructure

This commit is contained in:
olikraus 2017-04-16 09:10:21 +02:00
parent 43311096b6
commit a91a82c296
1 changed files with 59 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

81
sys/arm/stm32l031x6/u8g2_rtc/main.c
View File

@ -36,15 +36,30 @@ void __attribute__ ((interrupt, used)) SysTick_Handler(void)
void __attribute__ ((interrupt, used)) RTC_IRQHandler(void)
{
RTC->ISR &= ~RTC_ISR_WUTF; /* clear the wake up flag... is this required? */
if ( (EXTI->PR & EXTI_PR_PIF20) != 0 )
{
EXTI->PR = EXTI_PR_PIF20; /* wake up is connected to line 20, clear this IRQ */
}
/* the wake up time flag must be cleared, otherwise no further IRQ will happen */
/* in principle, this should happen only when a IRQ line 20 IRQ happens, but */
/* it will be more safe to clear this flag for any interrupt */
RTC->ISR &= ~RTC_ISR_WUTF; /* clear the wake up flag */
RTCIRQCount++;
}
/*=======================================================================*/
/*
Set internal high speed clock as clock for the system
Also call SystemCoreClockUpdate()
This must be executed after each reset.
*/
void setHSIClock()
{
/* test if the current clock source is something else than HSI */
if ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
{
@ -96,16 +111,47 @@ void setHSIClock()
;
}
/*=======================================================================*/
/*
Setup systick interrupt.
A call to SystemCoreClockUpdate() is required before calling this function.
This must be executed after each reset.
*/
void startSysTick(void)
{
SysTick->LOAD = (SystemCoreClock/1000)*50 - 1; /* 50ms task */
SysTick->VAL = 0;
SysTick->CTRL = 7; /* enable, generate interrupt (SysTick_Handler), do not divide by 2 */
}
/*=======================================================================*/
/*
Setup u8g2
This must be executed only after POR reset.
*/
void initDisplay(void)
{
/* setup display */
u8g2_Setup_ssd1306_i2c_128x64_noname_f(&u8g2, U8G2_R0, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_stm32l0);
u8g2_InitDisplay(&u8g2);
u8g2_SetPowerSave(&u8g2, 0);
u8g2_SetFont(&u8g2, u8g2_font_6x12_tf);
u8g2_ClearBuffer(&u8g2);
u8g2_DrawStr(&u8g2, 0,12, "STM32L031");
u8g2_DrawStr(&u8g2, 0,24, u8x8_u8toa(SystemCoreClock/1000000, 2));
u8g2_DrawStr(&u8g2, 20,24, "MHz");
u8g2_SendBuffer(&u8g2);
}
/*=======================================================================*/
int main()
{
setHSIClock();
SystemCoreClockUpdate(); /* Update SystemCoreClock() */
//SystemCoreClock = 32000000UL;
SysTick->LOAD = (SystemCoreClock/1000)*50 - 1; /* 50ms task */
SysTick->VAL = 0;
SysTick->CTRL = 7; /* enable, generate interrupt (SysTick_Handler), do not divide by 2 */
startSysTick();
RCC->IOPENR |= RCC_IOPENR_IOPAEN; /* Enable clock for GPIO Port A */
__NOP();
@ -131,17 +177,7 @@ int main()
GPIOA->PUPDR |= GPIO_PUPDR_PUPD2_0; /* pullup for PA2 */
/* setup display */
u8g2_Setup_ssd1306_i2c_128x64_noname_f(&u8g2, U8G2_R0, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_stm32l0);
u8g2_InitDisplay(&u8g2);
u8g2_SetPowerSave(&u8g2, 0);
u8g2_SetFont(&u8g2, u8g2_font_6x12_tf);
u8g2_ClearBuffer(&u8g2);
u8g2_DrawStr(&u8g2, 0,12, "STM32L031");
u8g2_DrawStr(&u8g2, 0,24, u8x8_u8toa(SystemCoreClock/1000000, 2));
u8g2_DrawStr(&u8g2, 20,24, "MHz");
u8g2_SendBuffer(&u8g2);
initDisplay();
/* real time clock enable */
@ -185,7 +221,7 @@ int main()
while((RTC->ISR & RTC_ISR_WUTWF) != RTC_ISR_WUTWF)
;
RTC->WUTR = 0x010; /* reload is 1: 1Hz with the 1Hz clock */
RTC->WUTR = 0; /* reload is 1: 1Hz with the 1Hz clock */
RTC->CR &= ~RTC_CR_WUCKSEL; /* clear selection register */
RTC->CR |= RTC_CR_WUCKSEL_2; /* select the 1Hz clock */
RTC->CR |= RTC_CR_WUTE | RTC_CR_WUTIE ;
@ -195,8 +231,9 @@ int main()
RTC->WPR = 0; /* enable RTC write protection */
RTC->WPR = 0;
EXTI->IMR |= EXTI_IMR_IM20;
EXTI->RTSR |= EXTI_RTSR_RT20;
/* wake up IRQ is connected to line 20 */
EXTI->RTSR |= EXTI_RTSR_RT20; /* rising edge for wake up line */
EXTI->IMR |= EXTI_IMR_IM20; /* interrupt enable */
NVIC_EnableIRQ(RTC_IRQn);
NVIC_SetPriority(RTC_IRQn, 0);