diff --git a/ChangeLog b/ChangeLog
index 4b39bed6..c11ac254 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -189,4 +189,7 @@ https://github.com/olikraus/u8g2 ChangeLog
   * NEW FONT FORMAT for speedup of the unicode font section (issue 596)  
   * Fixed a bug in the font construction for monospaced fonts (issue 669) 
   * Added SpaceTrash game (issue 622)
+  * Added support for T6963 160x80 Displays (issue 635)
+  * Added support for EA W128128 (issue 641)
+  
   
diff --git a/csrc/u8x8.h b/csrc/u8x8.h
index 34c451c3..ab51ee70 100644
--- a/csrc/u8x8.h
+++ b/csrc/u8x8.h
@@ -826,6 +826,7 @@ uint8_t u8x8_d_st7567_pi_132x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void
 uint8_t u8x8_d_st7567_jlx12864(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7567_enh_dg128064(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7567_enh_dg128064i(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_st7567_64x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7586s_s028hn118a(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7586s_erc240160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7588_jlx12864(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
diff --git a/csrc/u8x8_d_st7567.c b/csrc/u8x8_d_st7567.c
index 04a07593..ede2ca36 100644
--- a/csrc/u8x8_d_st7567.c
+++ b/csrc/u8x8_d_st7567.c
@@ -572,3 +572,140 @@ uint8_t u8x8_d_st7567_enh_dg128064i(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int,
   return 1;
 }
 
+
+/*=====================================================*/
+/* issue 657 */
+
+static const u8x8_display_info_t u8x8_st7567_64x32_display_info =
+{
+  /* chip_enable_level = */ 0,
+  /* chip_disable_level = */ 1,
+  
+  /* post_chip_enable_wait_ns = */ 150,	/* */
+  /* pre_chip_disable_wait_ns = */ 50,	/* */
+  /* reset_pulse_width_ms = */ 1, 
+  /* post_reset_wait_ms = */ 1, 
+  /* sda_setup_time_ns = */ 50,		/* */
+  /* sck_pulse_width_ns = */ 120,	/* */
+  /* sck_clock_hz = */ 4000000UL,	/* */
+  /* spi_mode = */ 0,		/* active high, rising edge */
+  /* i2c_bus_clock_100kHz = */ 4,
+  /* data_setup_time_ns = */ 40,	/* */
+  /* write_pulse_width_ns = */ 80,	/* */
+  /* tile_width = */ 8,		
+  /* tile_hight = */ 4,
+  /* default_x_offset = */ 32,
+  /* flipmode_x_offset = */ 32,
+  /* pixel_width = */ 64,
+  /* pixel_height = */ 32
+};
+
+static const uint8_t u8x8_d_st7567_64x32_init_seq[] = {
+    
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  
+  U8X8_C(0x0e2),            			/* soft reset */
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x040),		                /* set display start line to 0 */
+  
+  U8X8_C(0x0a1),		                /* ADC */
+  U8X8_C(0x0c0),		                /* common output mode */
+  // Flipmode
+  //U8X8_C(0x0a0),		                /* ADC  */
+  //U8X8_C(0x0c8),		                /* common output mode */
+  
+  U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
+  U8X8_C(0x0a2),		                /* LCD bias 1/9 */
+  U8X8_C(0x028|4),		                /* all power  control circuits on */
+  U8X8_DLY(50),
+  U8X8_C(0x028|6),		                /* all power  control circuits on */
+  U8X8_DLY(50),
+  U8X8_C(0x028|7),		                /* all power  control circuits on */
+  U8X8_DLY(50),
+  
+  U8X8_C(0x024),		                /* v0 voltage resistor ratio, taken from issue 657 */
+  U8X8_CA(0x081, 0x080),		/* set contrast, contrast value*/
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
+   
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+uint8_t u8x8_d_st7567_64x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  uint8_t x, c;
+  uint8_t *ptr;
+  switch(msg)
+  {
+    case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+      u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st7567_64x32_display_info);
+      break;
+    case U8X8_MSG_DISPLAY_INIT:
+      u8x8_d_helper_display_init(u8x8);
+      u8x8_cad_SendSequence(u8x8, u8x8_st7567_64x32_init_seq);
+      break;
+    case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+      if ( arg_int == 0 )
+	u8x8_cad_SendSequence(u8x8, u8x8_d_st7567_132x64_powersave0_seq);
+      else
+	u8x8_cad_SendSequence(u8x8, u8x8_d_st7567_132x64_powersave1_seq);
+      break;
+    case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
+      if ( arg_int == 0 )
+      {
+	u8x8_cad_SendSequence(u8x8, u8x8_d_st7567_132x64_flip0_seq);
+	u8x8->x_offset = u8x8->display_info->default_x_offset;
+      }
+      else
+      {
+	u8x8_cad_SendSequence(u8x8, u8x8_d_st7567_132x64_flip1_seq);
+	u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+      }	
+      break;
+#ifdef U8X8_WITH_SET_CONTRAST
+    case U8X8_MSG_DISPLAY_SET_CONTRAST:
+      u8x8_cad_StartTransfer(u8x8);
+      u8x8_cad_SendCmd(u8x8, 0x081 );
+      u8x8_cad_SendArg(u8x8, arg_int >> 2 );	/* st7567 has range from 0 to 63 */
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+#endif
+    case U8X8_MSG_DISPLAY_DRAW_TILE:
+      u8x8_cad_StartTransfer(u8x8);
+    
+      x = ((u8x8_tile_t *)arg_ptr)->x_pos;
+      x *= 8;
+      x += u8x8->x_offset;
+      u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) );
+      u8x8_cad_SendCmd(u8x8, 0x000 | ((x&15)));
+      u8x8_cad_SendCmd(u8x8, 0x0b0 | (((u8x8_tile_t *)arg_ptr)->y_pos));
+    
+      c = ((u8x8_tile_t *)arg_ptr)->cnt;
+      c *= 8;
+      ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+      /* 
+	The following if condition checks the hardware limits of the st7567 
+	controller: It is not allowed to write beyond the display limits.
+	This is in fact an issue within flip mode.
+      */
+      if ( c + x > 132u )
+      {
+	c = 132u;
+	c -= x;
+      }
+      do
+      {
+	u8x8_cad_SendData(u8x8, c, ptr);	/* note: SendData can not handle more than 255 bytes */
+	arg_int--;
+      } while( arg_int > 0 );
+      
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+    default:
+      return 0;
+  }
+  return 1;
+}
diff --git a/tools/codebuild/codebuild.c b/tools/codebuild/codebuild.c
index edb4c870..0fb4eaf2 100644
--- a/tools/codebuild/codebuild.c
+++ b/tools/codebuild/codebuild.c
@@ -820,6 +820,25 @@ struct controller controller_list[] =
     }
   },
   
+  {
+    "st7567", 		8, 	4, 	"u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_6800|COM_8080,
+    "", /* is_generate_u8g2_class= */ 1,
+    {
+      { "64x32" },
+      { NULL }
+    }
+  },
+  {
+    "st7567", 		8, 	4, 	"u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_ssd13xx_i2c", "i2c", COM_I2C,
+    "", /* is_generate_u8g2_class= */ 1,
+    {
+      { "64x32" },
+      { NULL }
+    }
+  },
+  
+  
+  
   {
     "st7586s", 		48, 	17, 	"u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_011", "", COM_4WSPI,
     "", /* is_generate_u8g2_class= */ 1,