wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ra8835 320x240, issue #260

This commit is contained in:
olikraus 2017-05-20 18:16:28 +02:00
parent 41b4b394f6
commit 53eb12936f
11 changed files with 343 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
cppsrc/U8g2lib.h
View File

@ -5258,6 +5258,42 @@ class U8G2_RA8835_NHD_240X128_F_8080 : public U8G2 {
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_1_6800 : public U8G2 {
public: U8G2_RA8835_320X240_1_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_1(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_1_8080 : public U8G2 {
public: U8G2_RA8835_320X240_1_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_1(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_2_6800 : public U8G2 {
public: U8G2_RA8835_320X240_2_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_2(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_2_8080 : public U8G2 {
public: U8G2_RA8835_320X240_2_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_2(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_F_6800 : public U8G2 {
public: U8G2_RA8835_320X240_F_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_f(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8G2_RA8835_320X240_F_8080 : public U8G2 {
public: U8G2_RA8835_320X240_F_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
u8g2_Setup_ra8835_320x240_f(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
/* Arduino constructor list end */

12
cppsrc/U8x8lib.h
View File

@ -1913,6 +1913,18 @@ class U8X8_RA8835_NHD_240X128_8080 : public U8X8 {
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8X8_RA8835_320X240_6800 : public U8X8 {
public: U8X8_RA8835_320X240_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
u8x8_Setup(getU8x8(), u8x8_d_ra8835_320x240, u8x8_cad_100, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
class U8X8_RA8835_320X240_8080 : public U8X8 {
public: U8X8_RA8835_320X240_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
u8x8_Setup(getU8x8(), u8x8_d_ra8835_320x240, u8x8_cad_100, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
}
};
// constructor list end

6
csrc/u8g2.h
View File

@ -520,6 +520,9 @@ uint8_t *u8g2_m_sed1330_30_f(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_30_1(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_30_2(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_30_f(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_40_1(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_40_2(uint8_t *page_cnt);
uint8_t *u8g2_m_ra8835_40_f(uint8_t *page_cnt);
uint8_t *u8g2_m_a2printer_48_1(uint8_t *page_cnt);
uint8_t *u8g2_m_a2printer_48_2(uint8_t *page_cnt);
uint8_t *u8g2_m_a2printer_48_f(uint8_t *page_cnt);
@ -750,6 +753,9 @@ void u8g2_Setup_sed1330_240x128_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_
void u8g2_Setup_ra8835_nhd_240x128_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_ra8835_nhd_240x128_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_ra8835_nhd_240x128_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_ra8835_320x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_ra8835_320x240_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_ra8835_320x240_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_a2printer_384x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_a2printer_384x240_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
void u8g2_Setup_a2printer_384x240_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);

18
csrc/u8g2_d_memory.c
View File

@ -687,6 +687,24 @@ uint8_t *u8g2_m_ra8835_30_f(uint8_t *page_cnt)
*page_cnt = 16;
return buf;
}
uint8_t *u8g2_m_ra8835_40_1(uint8_t *page_cnt)
{
static uint8_t buf[320];
*page_cnt = 1;
return buf;
}
uint8_t *u8g2_m_ra8835_40_2(uint8_t *page_cnt)
{
static uint8_t buf[640];
*page_cnt = 2;
return buf;
}
uint8_t *u8g2_m_ra8835_40_f(uint8_t *page_cnt)
{
static uint8_t buf[9600];
*page_cnt = 30;
return buf;
}
uint8_t *u8g2_m_a2printer_48_1(uint8_t *page_cnt)
{
static uint8_t buf[384];

28
csrc/u8g2_d_setup.c
View File

@ -2043,6 +2043,34 @@ void u8g2_Setup_ra8835_nhd_240x128_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8
buf = u8g2_m_ra8835_30_f(&tile_buf_height);
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
}
/* ra8835 */
/* ra8835 1 */
void u8g2_Setup_ra8835_320x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
{
uint8_t tile_buf_height;
uint8_t *buf;
u8g2_SetupDisplay(u8g2, u8x8_d_ra8835_320x240, u8x8_cad_100, byte_cb, gpio_and_delay_cb);
buf = u8g2_m_ra8835_40_1(&tile_buf_height);
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
}
/* ra8835 2 */
void u8g2_Setup_ra8835_320x240_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
{
uint8_t tile_buf_height;
uint8_t *buf;
u8g2_SetupDisplay(u8g2, u8x8_d_ra8835_320x240, u8x8_cad_100, byte_cb, gpio_and_delay_cb);
buf = u8g2_m_ra8835_40_2(&tile_buf_height);
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
}
/* ra8835 f */
void u8g2_Setup_ra8835_320x240_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
{
uint8_t tile_buf_height;
uint8_t *buf;
u8g2_SetupDisplay(u8g2, u8x8_d_ra8835_320x240, u8x8_cad_100, byte_cb, gpio_and_delay_cb);
buf = u8g2_m_ra8835_40_f(&tile_buf_height);
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
}
/* a2printer */
/* a2printer 1 */
void u8g2_Setup_a2printer_384x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)

1
csrc/u8x8.h
View File

@ -757,6 +757,7 @@ uint8_t u8x8_d_ssd1322_nhd_256x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, vo
uint8_t u8x8_d_a2printer_384x240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_sed1330_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_ra8835_nhd_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_ra8835_320x240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_ssd1325_nhd_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_ssd1327_seeed_96x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
uint8_t u8x8_d_ssd1329_128x96_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);

85
csrc/u8x8_d_sed1330.c
View File

@ -264,3 +264,88 @@ uint8_t u8x8_d_ra8835_nhd_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, vo
return 1;
}
/*=============================================*/
static const u8x8_display_info_t u8x8_sed1330_320x240_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 30, /* G242CX Datasheet p5 */
/* pre_chip_disable_wait_ns = */ 10, /* G242CX Datasheet p5 */
/* reset_pulse_width_ms = */ 1,
/* post_reset_wait_ms = */ 6,
/* sda_setup_time_ns = */ 20,
/* sck_pulse_width_ns = */ 140,
/* sck_clock_hz = */ 1000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0,
/* i2c_bus_clock_100kHz = */ 4,
/* data_setup_time_ns = */ 120, /* G242CX Datasheet p5 */
/* write_pulse_width_ns = */ 220, /* G242CX Datasheet p5 */
/* tile_width = */ 40,
/* tile_hight = */ 30,
/* default_x_offset = */ 0,
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 320,
/* pixel_height = */ 240
};
static const uint8_t u8x8_d_sed1330_320x240_init_seq[] = {
U8X8_DLY(100),
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_DLY(100),
/* system init command, see also u8x8_d_sed1330_powersave0_seq */
U8X8_CA(0x040, 0x030), /* sys init (0x040) with one arg, where 0x030 is a wild guess */
/* system init has total 8 parameters, so 7 more are here */
U8X8_A(0x087), /* no idea here... WF (topmost bit) is set to one because it is suggested in the datasheet, lowest 3 bits refer to text mode only */
U8X8_A(0x007), /* FY: height of a char+1, does not matter here (hopefully), because we use graphics mode only */
U8X8_A(0x027), /* 40-1 */ /* C/R: this could be the number of horizontal bytes - 1 (Value confirmed with app notes p41) */
U8X8_A(0x039), /* TC/R: According to app notes fOSC=6Mhz fFF=70Hz --> TC/R = 74d*/
U8X8_A(0x0ef), /* L/F: Lines per frame - 1, probably this is the height of the display - 1 (value confirmed with app notes p41)*/
U8X8_A(0x028), /* Low byte of the virtual screen size. (Value confirmed with app notes p41) */
U8X8_A(0), /* High byte of the virtual screen size, see also section 9.1.2 */
U8X8_C(0x044), /* SCROLL */
U8X8_A(0x000),
U8X8_A(0x000),
U8X8_A(0x0ef),
U8X8_A(0x0b0),
U8X8_A(0x004),
U8X8_A(0x0ef),
U8X8_A(0x000),
U8X8_A(0x000),
U8X8_A(0x000),
U8X8_A(0x000),
U8X8_CA(0x05a, 0), /* HDOT SCR: Horizontal dotwise scroll... set to 0 */
U8X8_CA(0x05b, 0x0c), /* OVLAY: 2-layer, all graphics, OR between layer 1 and 2 */
U8X8_DLY(100),
U8X8_END_TRANSFER(), /* disable chip */
U8X8_DLY(100),
};
uint8_t u8x8_d_ra8835_320x240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
switch(msg)
{
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sed1330_320x240_display_info);
break;
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_sed1330_320x240_init_seq);
break;
default:
return u8x8_d_sed1330_common(u8x8, msg, arg_int, arg_ptr);
}
return 1;
}

146
sys/arduino/u8g2_page_buffer/SelectionList/Makefile.180.uno Normal file
View File

@ -0,0 +1,146 @@
#
# Makefile.180 for Arduino/AVR
#
# Note:
# Display list make database: make -p -f/dev/null | less
# Install path of the arduino software. Requires a '/' at the end.
ARDUINO_PATH:=/home/kraus/prg/arduino-1.8.0/
# Board (and prozessor) information: see $(ARDUINO_PATH)hardware/arduino/avr/boards.txt
# Some examples:
# BOARD DESCRIPTION
# uno Arduino Uno
# atmega328 Arduino Duemilanove or Nano w/ ATmega328
# diecimila Arduino Diecimila, Duemilanove, or Nano w/ ATmega168
# mega Arduino Mega
# mega2560 Arduino Mega2560
# mini Arduino Mini
# lilypad328 LilyPad Arduino w/ ATmega328
BOARD:=uno
# The unix device where we can reach the arduino board
# Uno: /dev/ttyACM0
# Duemilanove: /dev/ttyUSB0
AVRDUDE_PORT:=/dev/ttyACM0
SRC_DIRS=$(ARDUINO_PATH)hardware/arduino/avr/cores/arduino/
SRC_DIRS+=$(ARDUINO_PATH)hardware/arduino/avr/libraries/SPI/src/
SRC_DIRS+=$(ARDUINO_PATH)hardware/arduino/avr/libraries/SPI/src/utility/
SRC_DIRS+=$(ARDUINO_PATH)hardware/arduino/avr/libraries/Wire/src/
SRC_DIRS+=$(ARDUINO_PATH)hardware/arduino/avr/libraries/Wire/src/utility/
SRC_DIRS+=../../../../csrc/
SRC_DIRS+=../../../../cppsrc/
#=== suffixes ===
.SUFFIXES: .elf .hex .ino
#=== identify user files ===
INOSRC:=$(shell ls *.ino)
TARGETNAME=$(basename $(INOSRC))
#=== internal names ===
LIBNAME:=$(TARGETNAME).a
ELFNAME:=$(TARGETNAME).elf
HEXNAME:=$(TARGETNAME).hex
BINNAME:=$(TARGETNAME).bin
DISNAME:=$(TARGETNAME).dis
MAPNAME:=$(TARGETNAME).map
#=== replace standard tools ===
CC:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-gcc
CXX:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-g++
AR:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-gcc-ar
OBJCOPY:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-objcopy
OBJDUMP:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-objdump
SIZE:=$(ARDUINO_PATH)hardware/tools/avr/bin/avr-size
AVRDUDE = $(ARDUINO_PATH)hardware/tools/avr/bin/avrdude
#=== get values from boards.txt ===
BOARDS_TXT:=$(ARDUINO_PATH)hardware/arduino/avr/boards.txt
# get the MCU value from the $(BOARD).build.mcu variable. For the atmega328 board this is atmega328p
MCU:=$(shell sed -n -e "s/$(BOARD).build.mcu=\(.*\)/\1/p" $(BOARDS_TXT))
# get the F_CPU value from the $(BOARD).build.f_cpu variable. For the atmega328 board this is 16000000
F_CPU:=$(shell sed -n -e "s/$(BOARD).build.f_cpu=\(.*\)/\1/p" $(BOARDS_TXT))
# get variant subfolder
VARIANT:=$(shell sed -n -e "s/$(BOARD).build.variant=\(.*\)/\1/p" $(BOARDS_TXT))
UPLOAD_SPEED:=$(shell sed -n -e "s/$(BOARD).upload.speed=\(.*\)/\1/p" $(BOARDS_TXT))
# get the AVRDUDE_PROGRAMMER value from the $(BOARD).upload.protocol variable. For the atmega328 board this is stk500
UPLOAD_PROTOCOL:=$(shell sed -n -e "s/$(BOARD).upload.protocol=\(.*\)/\1/p" $(BOARDS_TXT))
# use stk500v1, because stk500 will default to stk500v2
#UPLOAD_PROTOCOL:=stk500v1
AVRDUDE_FLAGS = -V -F
AVRDUDE_FLAGS += -C $(ARDUINO_PATH)/hardware/tools/avr/etc/avrdude.conf
AVRDUDE_FLAGS += -p $(MCU)
AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
AVRDUDE_FLAGS += -c $(UPLOAD_PROTOCOL)
AVRDUDE_FLAGS += -b $(UPLOAD_SPEED)
AVRDUDE_FLAGS += -U flash:w:$(HEXNAME)
#=== get all include dirs ===
INC_DIRS:=. $(SRC_DIRS) $(ARDUINO_PATH)hardware/arduino/avr/variants/$(VARIANT)
INC_OPTS:=$(addprefix -I,$(INC_DIRS))
#=== get all source files ===
CSRC:=$(shell ls $(addsuffix *.c,$(SRC_DIRS)) 2>/dev/null)
CPPSRC:=$(shell ls $(addsuffix *.cpp,$(SRC_DIRS)) 2>/dev/null)
#=== get all obj files ===
COBJ:=$(CSRC:.c=.o)
CPPOBJ:=$(CPPSRC:.cpp=.o)
OBJ:=$(COBJ) $(CPPOBJ) $(TARGETNAME).o
#=== options ===
COMMON_FLAGS = -g -Os -DF_CPU=$(F_CPU) -mmcu=$(MCU)
COMMON_FLAGS +=-DARDUINO=10800 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR
COMMON_FLAGS +=-ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects
COMMON_FLAGS +=$(INC_OPTS)
CFLAGS:=$(COMMON_FLAGS) -std=gnu99 -Wstrict-prototypes -Wall -Wextra
CXXFLAGS:=$(COMMON_FLAGS) -std=gnu++11 -fpermissive -fno-exceptions
LDFLAGS:=-g -Os -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=$(MCU)
LDLIBS:=-lm
all: $(HEXNAME) $(DISNAME)
$(SIZE) $(ELFNAME)
.PHONY: debug
debug:
@echo $(MCU) $(F_CPU) $(VARIANT) $(UPLOAD_SPEED) $(UPLOAD_PROTOCOL)
@echo $(SRC_DIRS)
@echo $(CSRC)
@echo $(CPPSRC)
@echo $(INC_OPTS)
.PHONY: clean
clean:
$(RM) $(OBJ) $(HEXNAME) $(ELFNAME) $(LIBNAME) $(DISNAME) $(MAPNAME) $(BINNAME)
.PHONY: upload
upload: $(HEXNAME)
stty -F $(AVRDUDE_PORT) hupcl
$(AVRDUDE) $(AVRDUDE_FLAGS)
# implicit rules
.ino.cpp:
@cp $< $@
.elf.hex:
@$(OBJCOPY) -O ihex -R .eeprom $< $@
# explicit rules
$(ELFNAME): $(LIBNAME)($(OBJ))
$(LINK.o) $(LFLAGS) $(LIBNAME) $(LDLIBS) -o $@
$(DISNAME): $(ELFNAME)
$(OBJDUMP) -D -S $< > $@

4
sys/arduino/u8g2_page_buffer/SelectionList/SelectionList.ino
View File

@ -95,7 +95,7 @@
//U8G2_ST7920_128X64_1_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* CS=*/ 10, /* reset=*/ 8);
//U8G2_ST7920_128X64_1_HW_SPI u8g2(U8G2_R0, /* CS=*/ 10, /* reset=*/ 8);
//U8G2_ST7565_EA_DOGM128_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8G2_ST7565_EA_DOGM132_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ U8X8_PIN_NONE); // DOGM132 Shield
//U8G2_ST7565_EA_DOGM132_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ U8X8_PIN_NONE); // DOGM132 Shield
//U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@ -148,7 +148,7 @@ void setup(void) {
// u8g2.begin(/* menu_select_pin= */ 5, /* menu_next_pin= */ 4, /* menu_prev_pin= */ 2, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 3);
// DOGM128 Shield (http://shieldlist.org/schmelle2/dogm128) + DOGXL160 Shield
//u8g2.begin(/* menu_select_pin= */ 2, /* menu_next_pin= */ 3, /* menu_prev_pin= */ 7, /* menu_up_pin= */ U8X8_PIN_NO NE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 8);
//u8g2.begin(/* menu_select_pin= */ 2, /* menu_next_pin= */ 3, /* menu_prev_pin= */ 7, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 8);
// Arduboy
//u8g2.begin(/*Select=*/ A0, /*Right/Next=*/ 5, /*Left/Prev=*/ 9, /*Up=*/ 8, /*Down=*/ 10, /*Home/Cancel=*/ A1); // Arduboy DevKit

2
sys/arduino/u8x8/GraphicsTest/GraphicsTest.ino
View File

@ -90,7 +90,7 @@
//U8X8_PCF8812_96X65_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Could be also PCF8814
//U8X8_PCF8812_96X65_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Could be also PCF8814
//U8X8_ST7565_EA_DOGM128_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
U8X8_ST7565_EA_DOGM128_2ND_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_ST7565_EA_DOGM128_2ND_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
//U8X8_ST7565_EA_DOGM132_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ U8X8_PIN_NONE); // DOGM132 Shield
//U8X8_ST7565_EA_DOGM132_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ U8X8_PIN_NONE); // DOGM132 Shield
//U8X8_ST7565_ZOLEN_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);

8
tools/codebuild/codebuild.c
View File

@ -660,6 +660,14 @@ struct controller controller_list[] =
{ NULL }
}
},
{
"ra8835", 40, 30, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_100", "", COM_6800|COM_8080,
"not tested", /* is_generate_u8g2_class= */ 1,
{
{ "320x240" },
{ NULL }
}
},
{
"a2printer", 48, 30, "u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_empty", "", COM_UART,
"", /* is_generate_u8g2_class= */ 0,