wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

a2 thermo printer

This commit is contained in:
olikraus 2016-07-27 15:59:53 +02:00
parent 8484859761
commit 28288359fe
3 changed files with 53 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
ChangeLog
View File

@ -22,5 +22,6 @@ https://github.com/olikraus/u8g2 ChangeLog
2016-07-02 v2.1.0 olikraus@gmail.com
* T6963 Support
* Experimental Support for SSD1322 256x64
* A2 Thermoprinter Support

5
cppsrc/U8g2lib.h
View File

@ -113,6 +113,11 @@ class U8G2 : public Print
void begin(void) {
/* note: call to u8x8_utf8_init is not required here, this is done in the setup procedures before */
initDisplay(); clearDisplay(); setPowerSave(0); }
void beginSimple(void) {
/* does not clear the display and does not wake up the display */
/* user is responsible for calling clearDisplay() and setPowerSave(0) */
initDisplay(); }
#ifdef U8X8_USE_PINS
/* use U8X8_PIN_NONE if a pin is not required */

61
sys/arduino/u8g2_page_buffer/A2Printer/A2Printer.ino
View File

@ -1,6 +1,9 @@
/*
A2Printer.ino
This is a special example for the A2 Thermo Printer
This example can NOT be used with LCDs and OLEDs
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
@ -61,8 +64,7 @@ extern "C" uint8_t u8x8_byte_arduino_serial(u8x8_t *u8g2, uint8_t msg, uint8_t a
case U8X8_MSG_BYTE_SEND:
data = (uint8_t *)arg_ptr;
while( arg_int > 0 )
{
{
while(PRINTER_SERIAL.available() > 0)
PRINTER_SERIAL.read();
PRINTER_SERIAL.write((uint8_t)*data);
@ -79,10 +81,6 @@ extern "C" uint8_t u8x8_byte_arduino_serial(u8x8_t *u8g2, uint8_t msg, uint8_t a
PRINTER_SERIAL.write(27); /* ESC */
PRINTER_SERIAL.write(64); /* @ --> reset printer */
delay(1000);
while(PRINTER_SERIAL.available() > 0)
PRINTER_SERIAL.read();
delay(1000);
PRINTER_SERIAL.println("Oli");
break;
@ -90,7 +88,6 @@ extern "C" uint8_t u8x8_byte_arduino_serial(u8x8_t *u8g2, uint8_t msg, uint8_t a
break;
case U8X8_MSG_BYTE_START_TRANSFER:
PRINTER_SERIAL.begin(19200);
break;
case U8X8_MSG_BYTE_END_TRANSFER:
@ -114,18 +111,54 @@ void setup(void) {
u8x8_byte_arduino_serial, /* this is the new procedure from above */
u8x8_gpio_and_delay_arduino); /* standard arduino low level proc, used only for delay */
u8g2.begin();
u8g2.beginSimple(); /* Do not clear the display, wake is not required */
}
#define XO 10
void drawLogo(void)
{
u8g2.setFontMode(1); // Transparent
u8g2.setFontDirection(0);
u8g2.setFont(u8g2_font_inb24_mf);
u8g2.drawStr(0+XO, 30, "U");
u8g2.setFontDirection(1);
u8g2.setFont(u8g2_font_inb30_mn);
u8g2.drawStr(21+XO,8,"8");
u8g2.setFontDirection(0);
u8g2.setFont(u8g2_font_inb24_mf);
u8g2.drawStr(51+XO,30,"g");
u8g2.drawStr(67+XO,30,"\xb2");
u8g2.drawHLine(2+XO, 35, 47);
u8g2.drawHLine(3+XO, 36, 47);
u8g2.drawVLine(45+XO, 32, 12);
u8g2.drawVLine(46+XO, 33, 12);
}
void drawURL(void)
{
u8g2.setFont(u8g2_font_6x12_tr);
u8g2.drawStr(1+XO,54,"github.com/olikraus/u8g2");
}
void loop(void) {
u8g2.firstPage();
u8g2.setFont(u8g2_font_ncenB24_tr);
do {
u8g2.drawStr(0,40,"1. Hello World!");
u8g2.drawStr(0,80,"2. Hello World!");
u8g2.drawStr(0,120,"3. Hello World!");
u8g2.drawStr(0,160,"4. Hello World!");
u8g2.drawStr(0,200,"5. Hello World!");
drawLogo();
drawURL();
/* worst case heating test */
u8g2.drawRBox(4,90,384-8,20, 8);
/* heating test with some text */
u8g2.setFont(u8g2_font_inb24_mf);
u8g2.drawStr(10,160,"Hello World!");
/* draw a frame around the picture */
u8g2.drawFrame(0,0,384,240);
u8g2.drawFrame(1,1,384-2,240-2);
} while ( u8g2.nextPage() );