wuqiyang312
/
u8g2-copy
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
u8g2-copy/csrc/u8x8_d_st75256.c

591 lines
18 KiB
C
Raw Normal View History

issue #163
2017-02-16 05:17:49 +08:00
/*
u8x8_d_st75256.c
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
Copyright (c) 2017, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
0x030 ext 00
0x031 ext 01
0x038 ext 10
0x039 ext 11
cad 011
cleanup
2017-02-19 22:45:49 +08:00
issue #163
2017-02-16 05:17:49 +08:00
*/
#include "u8x8.h"
/* not a real power down for the st75256... just a display off */
static const uint8_t u8x8_d_st75256_256x128_powersave0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x94 ), /* sleep out */
U8X8_DLY(10),
U8X8_C( 0xaf ), /* display on */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st75256_256x128_powersave1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0xae ), /* display off */
U8X8_C( 0x95 ), /* sleep in */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static uint8_t u8x8_d_st75256_256x128_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
uint8_t x, c;
uint8_t *ptr;
switch(msg)
{
/* handled by the calling function
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st75256_256x128_display_info);
break;
*/
/* handled by the calling function
case U8X8_MSG_DISPLAY_INIT:
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_init_seq);
break;
*/
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
if ( arg_int == 0 )
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_powersave0_seq);
else
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_powersave1_seq);
break;
#ifdef U8X8_WITH_SET_CONTRAST
case U8X8_MSG_DISPLAY_SET_CONTRAST:
u8x8_cad_StartTransfer(u8x8);
u8x8_cad_SendCmd(u8x8, 0x030 );
u8x8_cad_SendCmd(u8x8, 0x081 ); /* there are 9 bit for the volume control */
u8x8_cad_SendArg(u8x8, (arg_int & 0x1f)<<1 ); /* lower 6 bit */
u8x8_cad_SendArg(u8x8, (arg_int>>5)); /* upper 3 bit */
u8x8_cad_EndTransfer(u8x8);
break;
#endif
case U8X8_MSG_DISPLAY_DRAW_TILE:
u8x8_cad_StartTransfer(u8x8);
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
x *= 8;
x += u8x8->x_offset;
u8x8_cad_SendCmd(u8x8, 0x030 ); /* select command set */
u8x8_cad_SendCmd(u8x8, 0x075 ); /* row */
st75256
2017-02-18 04:52:02 +08:00
u8x8_cad_SendArg(u8x8, (((u8x8_tile_t *)arg_ptr)->y_pos));
u8x8_cad_SendArg(u8x8, (((u8x8_tile_t *)arg_ptr)->y_pos));
issue #163
2017-02-16 05:17:49 +08:00
u8x8_cad_SendCmd(u8x8, 0x015 ); /* col */
st75256
2017-02-18 04:52:02 +08:00
u8x8_cad_SendArg(u8x8, x);
u8x8_cad_SendArg(u8x8, 255);
u8x8_cad_SendCmd(u8x8, 0x05c );
issue #163
2017-02-16 05:17:49 +08:00
do
{
c = ((u8x8_tile_t *)arg_ptr)->cnt;
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
/* SendData can not handle more than 255 bytes, treat c > 31 correctly */
if ( c > 31 )
{
u8x8_cad_SendData(u8x8, 248, ptr);
ptr+=248;
c -= 31;
}
u8x8_cad_SendData(u8x8, c*8, ptr);
arg_int--;
} while( arg_int > 0 );
u8x8_cad_EndTransfer(u8x8);
break;
default:
return 0;
}
return 1;
}
/*=============================================*/
static const u8x8_display_info_t u8x8_st75256_256x128_display_info =
{
/* chip_enable_level = */ 0,
/* chip_disable_level = */ 1,
/* post_chip_enable_wait_ns = */ 20,
/* pre_chip_disable_wait_ns = */ 20,
/* reset_pulse_width_ms = */ 5,
/* post_reset_wait_ms = */ 5, /**/
/* sda_setup_time_ns = */ 20, /* */
/* sck_pulse_width_ns = */ 40, /* */
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
/* spi_mode = */ 0, /* active high, rising edge */
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
/* data_setup_time_ns = */ 15,
/* write_pulse_width_ns = */ 70,
/* tile_width = */ 32,
/* tile_hight = */ 16,
/* default_x_offset = */ 0, /* must be 0, because this is checked also for normal mode */
/* flipmode_x_offset = */ 0,
/* pixel_width = */ 256,
/* pixel_height = */ 128
};
static const uint8_t u8x8_d_st75256_256x128_init_seq[] = {
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_DLY(120),
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x06e ), /* enable master */
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_CA( 0x0d7, 0x09f ), /* disable auto read */
U8X8_DLY(20),
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_CA( 0x0e0, 0x000 ), /* enable OTP read */
U8X8_DLY(20),
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x0e3 ), /* OTP Upload */
U8X8_DLY(20),
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x0e1 ), /* OTP controll out */
U8X8_DLY(20),
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x094 ), /* sleep out */
U8X8_DLY(10),
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0xae ), /* display off */
U8X8_DLY(10),
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CA( 0x020, 0x00b ), /* Power control: Regulator, follower & booster on */
U8X8_DLY(10),
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CAA( 0x81, 0x36, 0x05 ), /* Volume control */
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x020 ), /* gray levels */
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x17 ),
U8X8_A( 0x17),
U8X8_A( 0x17 ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x1d ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x1d ),
U8X8_A( 0x1d ),
U8X8_A( 0x1d ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x032 ), /* analog circuit set */
U8X8_A( 0x000 ), /* code example: OSC Frequency adjustment */
U8X8_A( 0x001 ), /* Frequency on booster capacitors 1 = 6KHz? */
U8X8_A( 0x000 ), /* Bias: 1: 1/13, 2: 1/12, 3: 1/11, 4:1/10, 5:1/9 */
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_CA( 0x051, 0x0fb ), /* booster level x10 */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CA( 0x0f0, 0x011 ), /* monochrome mode = 0x010*/
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0xca ), /* display control, 3 args follow */
U8X8_A( 0x00 ), /* no clock division */
U8X8_A( 0x7f ), /* 1/128 duty value from the DS overview page*/
//U8X8_A( 0x9f ), /* 1/160 duty value from the DS example code */
U8X8_A( 0x00 ), /* nline off */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x040 ), /* internal power */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0xa6 ), /* normal display */
U8X8_C( 0x22 ), /* all pixel off mode */
U8X8_C( 0xaf ), /* display on */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CAA(0x75, 0, 16), /* row range */
U8X8_CAA(0x15, 0, 255), /* col range */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x5c ), /* write data to RAM */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0xaa ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_A( 0x55 ), /* */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
update
2017-03-10 05:30:12 +08:00
static const uint8_t u8x8_d_st75256_240x160_init_seq_c[] = {
U8X8_END_TRANSFER(), /* disable chip */
// U8G_ESC_RST(1), /* hardware reset. Min 1 ms */
U8X8_DLY(1), /* Delay max 1 ms */
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C(0x030), // EXT=0
U8X8_C(0x094), // Sleep Out
U8X8_C(0x031), // EXT=1
// U8X8_CA(0x0D7,0x09F), // Autoread disable
U8X8_C(0x032), // Analog set
U8X8_A(0x000), /* OSC Frequency adjustment */
U8X8_A(0x001), /* Booster Efficiency =Level 1 */
U8X8_A(0x003), /* Bias = 1/11 */
U8X8_CA(0x051,0x0FB), /* Booster Level x10 */
// U8X8_C(0x020), // Gray levels tune for 4-gray mode
// U8X8_A(0x001), //
// U8X8_A(0x002), //
// U8X8_A(0x005), //
// U8X8_A(0x007), //
// U8X8_A(0x009), //
// U8X8_A(0x00b), //
// U8X8_A(0x00d), //
// U8X8_A(0x010), //
// U8X8_A(0x011), //
// U8X8_A(0x013), //
// U8X8_A(0x015), //
// U8X8_A(0x017), //
// U8X8_A(0x019), //
// U8X8_A(0x01B), //
// U8X8_A(0x01D), //
// U8X8_A(0x01F), //
U8X8_C(0x030), // EXT1 = 0, EXT0 = 0 "Расширенные инструкции"
U8X8_C(0x075), // Установить адрес страницы
U8X8_A(0x001), // Start page
U8X8_A(0x015), // End page
U8X8_C(0x015), // Установить адрес столбца
U8X8_A(0x000), // Начальный адрес столбца: XS = 0
U8X8_A(0x0EF), // Адрес последнего столбца: XE = 240 (0xF0)
U8X8_C(0x0BC), // Направление сканирования
U8X8_A(0x001), // MX.MY=Normal
U8X8_A(0x0A6), //
U8X8_C(0x008), // Выбор формата данных, 0x0C младший - старший D0-D7, 0x08 старший - младший D7-D0
U8X8_C(0x0CA), // Настройка отображения
U8X8_A(0x000), // Установить частоту привода CL: CLD = 0
U8X8_A(0x09F), // Рабочий цикл: Duty=160
U8X8_A(0x020), // N линия по борьбе значительным: Nline=off
U8X8_C(0x0F0), // Режим отображения
U8X8_A(0x010), // 0x11: 4-lever. 0x10: 2-level
U8X8_C(0x081), // Установить контраст, "0x81" негибкой, а затем двух данных может быть изменен, но "после первого тримминга грубой" Этот порядок Замерзание
U8X8_A(0x03F), // Точный контраст, регулируемый диапазон 0x00 ~ 0x3f в общей сложности 64
U8X8_A(0x003), // Грубый контраст, регулируемый диапазон 0x00 0x07 ~, в общей сложности восемь
U8X8_C(0x020), // Управление питанием
U8X8_A(0x00B), // D0=regulator ; D1=follower ; D3=booste, on:1 off:0
U8X8_DLY(1), // Delay 0,1 ms
U8X8_C(0x0AF), // Открыть Показать
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
static const uint8_t u8x8_d_st75256_256x128_init_seq_x[] = {
issue #163
2017-02-16 05:17:49 +08:00
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x094 ), /* sleep out */
st75256
2017-02-18 04:52:02 +08:00
U8X8_DLY(10),
//U8X8_C( 0xae ), /* display off */
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
issue #163
2017-02-16 05:17:49 +08:00
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x0d7 ), /* OTP Auto Read */
U8X8_A( 0x09f ), /* ... disable */
U8X8_C( 0x032 ), /* analog circuit set */
U8X8_A( 0x000 ), /* code example: OSC Frequency adjustment */
U8X8_A( 0x001 ), /* Frequency on booster capacitors 1 = 6KHz? */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0x000 ), /* Bias: 1: 1/13, 2: 1/12, 3: 1/11, 4:1/10, 5:1/9 */
U8X8_CA( 0x051, 0x0fb ), /* booster level x10 */
U8X8_C( 0x020 ), /* gray levels */
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x1f ),
U8X8_A( 0x1f ),
U8X8_A( 0x1f ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x1f ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
U8X8_A( 0x1f ),
U8X8_A( 0x1f ),
U8X8_A( 0x1f ),
U8X8_A( 0x00 ),
U8X8_A( 0x00 ),
/*
U8X8_A( 0x01 ),
U8X8_A( 0x03 ),
U8X8_A( 0x05 ),
U8X8_A( 0x07 ),
U8X8_A( 0x09 ),
U8X8_A( 0x0b ),
U8X8_A( 0x0d ),
U8X8_A( 0x10 ),
U8X8_A( 0x11 ),
U8X8_A( 0x13 ),
U8X8_A( 0x15 ),
U8X8_A( 0x17 ),
U8X8_A( 0x19 ),
U8X8_A( 0x1b ),
U8X8_A( 0x1d ),
U8X8_A( 0x1f ),
*/
issue #163
2017-02-16 05:17:49 +08:00
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0xca ), /* display control, 3 args follow */
U8X8_A( 0x00 ), /* no clock division */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0x7f ), /* 1/128 duty value from the DS overview page*/
//U8X8_A( 0x9f ), /* 1/160 duty value from the DS example code */
U8X8_A( 0x00 ), /* nline off */
U8X8_CA( 0x0f0, 0x011 ), /* monochrome mode */
//U8X8_C( 0x76 ), /* ICON */
//U8X8_C( 0xd1 ), /* OSC on */
U8X8_CAA( 0x81, 0x36, 0x05 ), /* Volume control */
issue #163
2017-02-16 05:17:49 +08:00
U8X8_CA( 0x020, 0x00b ), /* Power control: Regulator, follower & booster on */
U8X8_DLY(10),
U8X8_CA( 0xbc, 0x00 ), /* data scan dir */
st75256
2017-02-18 04:52:02 +08:00
U8X8_C( 0x030 ), /* select 00 commands */
issue #163
2017-02-16 05:17:49 +08:00
U8X8_C( 0xa6 ), /* normal display */
U8X8_C( 0x22 ), /* all pixel off mode */
st75256
2017-02-18 04:52:02 +08:00
U8X8_C( 0x031 ), /* select 01 commands */
U8X8_C( 0x040 ), /* internal power */
U8X8_C( 0x030 ), /* select 00 commands */
issue #163
2017-02-16 05:17:49 +08:00
U8X8_C( 0xaf ), /* display on */
st75256
2017-02-18 04:52:02 +08:00
U8X8_C( 0x030 ), /* select 00 commands */
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
U8X8_C( 0x077 ), /* enable ICON */
U8X8_CAA( 0x015,0,255 ), /* col */
issue #163
2017-02-16 05:17:49 +08:00
U8X8_C( 0x5c ), /* write data to RAM */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
U8X8_C( 0x076 ), /* disable ICON */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_CAA(0x75, 1, 2), /* row range */
U8X8_CAA(0x15, 0, 50), /* col range */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_C( 0x5c ), /* write data to RAM */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0xff ), /* */
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
U8X8_A( 0xfc ), /* */
U8X8_A( 0xf0 ), /* */
U8X8_A( 0xc0 ), /* */
U8X8_A( 0xf0 ), /* */
U8X8_A( 0xfc ), /* */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0xff ), /* */
removed st75256 code, #163
2017-02-18 18:44:59 +08:00
U8X8_A( 0xfc ), /* */
U8X8_A( 0xf0 ), /* */
U8X8_A( 0xc0 ), /* */
U8X8_A( 0xf0 ), /* */
U8X8_A( 0xfc ), /* */
st75256
2017-02-18 04:52:02 +08:00
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
U8X8_A( 0xff ), /* */
issue #163
2017-02-16 05:17:49 +08:00
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st75256_jlx12864_flip0_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
static const uint8_t u8x8_d_st75256_jlx12864_flip1_seq[] = {
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
U8X8_C( 0x030 ), /* select 00 commands */
U8X8_END_TRANSFER(), /* disable chip */
U8X8_END() /* end of sequence */
};
uint8_t u8x8_d_st75256_jlx256128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
{
if ( u8x8_d_st75256_256x128_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
return 1;
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
{
u8x8_SetI2CAddress(u8x8, 0x078); /* lowest I2C adr of the ST75256 */
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st75256_256x128_display_info);
return 1;
}
else if ( msg == U8X8_MSG_DISPLAY_INIT )
{
u8x8_d_helper_display_init(u8x8);
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_init_seq);
update
2017-03-10 05:30:12 +08:00
//u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_240x160_init_seq_c);
st75256
2017-02-18 04:52:02 +08:00
for(;;)
;
issue #163
2017-02-16 05:17:49 +08:00
return 1;
}
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
{
if ( arg_int == 0 )
{
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_jlx12864_flip0_seq);
u8x8->x_offset = u8x8->display_info->default_x_offset;
}
else
{
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_jlx12864_flip1_seq);
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
}
return 1;
}
return 0;
}